User manual BRAUN CONTOUR

[. . . ] Do not exchange or manipulate any part of it. Otherwise there is risk of electric shock. 360 and 370 models: The green charging light blinks when the shaver is being charged. [. . . ] ⷠIf the rechargeable batteries are discharged, you may also shave by connecting the shaver to an electrical outlet via the special cord set. We recommend that you shave before washing, as the skin tends to be slightly swollen after washing. Stretch the skin and shave against the direction of beard growth. ⷠTo maintain 100% shaving performance, replace the shaver foil and cutter block, when the replacement light (8) comes on (after about 18 months), or when the shaving parts are worn. Warning: Detach the hand-held part from the power supply before cleaning it in water. regular cleaning ensures better shaving performance. Rinsing the shaving head after each shave under running water is an easy and fast way to keep it clean: · Switch the shaver on (cordless) and rinse the shaving head under hot running water. A natural based soap may also be used provided it contains no particles or abrasive substances. Rinse off all foam and let the shaver run for a few more seconds. ⷠNext, switch off the shaver, remove the shaver foil and the cutter block. Then leave the disassembled shaving parts to dry. ⷠIf you regularly clean the shaver under water, then once a week apply a drop of light machine oil onto the long hair trimmer and shaver foil. Alternatively, you may clean the shaver using the brush provided: · Using the brush, clean the cutter block and the inner area of the shaver head. However, do not clean the shaver foil with the brush as this may damage the foil. Change both parts at the same time for a closer shave with less skin irritation. (Shaver foil and cutter block: 31 B/S) The replacement light will remind you during the next 7 shaves to replace the shaving parts. [. . . ] In the interest of protecting the environment, please do not dispose of the product in the household waste at the end of its useful life. Disposal can take place at a Braun Service Centre or at appropriate collection points provided in your country. About every four weeks, clean the cutter block with Braun cleaning agents. [. . . ]