User manual BRAUN FLEXINTEGRAL

[. . . ] For safety reasons, periodically check the cord for damage and replace it, if it is loose in the shaver socket. Foil protection cap Triple shaving frame Duo cutter block Pop-out long hair trimmer Switch lock On/off switch Low-charge light (red) (models 5316/5315 only) Charging light (green) Shaver socket Switch for locking the swivel head («head lock») and for activating the pop-out long hair trimmer («trimmer») Release button When charging the shaver for the first time, connect it to the mains and charge it (switch position «off») for at least 4 hours / model 5312: 8 hours. Then shave without the cord until the red low-charge light lights up. [. . . ] Shaving with the pivoting head locked (to permit shaving in difficult areas, e. The pivoting cutting system automatically adjusts to every contour of your face. 3 Shaving with the cord If the cell unit is discharged, you may also shave with the shaver connected to the mains (100­240 V ~). (If the shaver should not run immediately, charge it with the switch on position «off» for approx. We recommend that you shave before washing, as the skin tends to be slightly swollen after washing. Stretch your skin and shave against the direction of beard growth. To ensure optimum shaving performance, we recommend to replace the shaver foil and cutter block every 18 months, or when the parts are worn. Press the release button, take off the triple shaving frame and gently tap it out on a flat surface. Then thoroughly clean the duo cutter block with the brush as well as the inner area of the pivoting head. About every four weeks, clean the duo cutter block with Braun cleaning agents. 2 Changing the shaving parts The shaver foil and cutter block are precision parts that, in time, are subject to wear. Replace your foil frame and cutter block every 18 months and get a 25% better shave. * (Shaver foil and cutter block: part no. F/C505, available at your dealer or Braun Service Centres) * (Overall evaluation from Braun users comparing their shave with new parts and those used for 18 months. In order to maintain the capacity of the cell unit, the shaver has to be discharged by shaving every 6 months approximately. Do not expose the shaver to temperatures of more than 50 °C for longer periods of time. [. . . ] For UK only: This guarantee in no way affects your rights under statutory law. Within the guarantee period we will eliminate, free of charge, any defects in the appliance resulting from faults in materials or workmanship, either by repairing or replacing the complete appliance as we may choose. This guarantee extends to every country where this appliance is supplied by Braun or its appointed distributor. [. . . ]