User manual BRAUN GILLETTE VENUS NAKED SKIN

[. . . ] Das CE-Kennzeichen bestätigt, dass dieses Gerät die folgenden EWG-Richtlinien erfüllt: • Richtlinie für Niedrigspannung 2006/95/EC • Richtlinie für elektromagnetische Kompatibilität 2004/108/EC • Richtlinie für energieverbrauchende Produkte 2009/125/EC 20 21 Skin Suitability Skin Tone Chart Skin Tone Setting I II Please read this entire user guide, including all warnings and safety information, before using the Venus Naked Skin® Intense Pulsed Light Hair Removal System. The Venus Naked Skin® Intense Pulsed Light Hair Removal System is not suitable for everyone. It works effectively on light to medium skin tones and dark hair colors. Venus Naked Skin® is not effective on treatment areas with red, very blonde, grey or white hair. [. . . ] Place the handset firmly on the skin so that both contact bars on the outer corners of the treatment window are placed in the Activating Gel that is on the skin surface. A WHITE light signals you have the proper contact. If the white light does not appear, be sure to adjust the handset so that both bars remain in contact with the skin. CORRECT H • f an illuminated RED light appears, I this indicates the skin tone in this area F is not suitable for treatment. i – IIII on the Skin Tone Sensor. HOW TO USE Treatment Before your first treatment, we advise you to perform a patch test on a small area of skin on a body part you plan to treat. please refer to page 37 for Patch Test details. Once you have established the correct skin tone setting and prepared the treatment area, you are ready to begin your treatment. The gel should remain in a thick layer on the skin to ensure proper contact with the Handset. MPORTANT: Before treating another l body part, you must perform a new measurement. NOTE: If all lights illuminate, this indicates that the measurement taken is not valid, e. , Skin Tone Sensor G does not have good contact. €  etting I is the HIGHEST power S setting and is for people with fair skin as shown on the Skin Tone Chart—Skin Tone 1. €  etting II is the MEDIUM power S setting and is for people with medium skin tone as shown on the Skin Tone Chart—Skin Tone 2. €  etting III is a LOWER power S setting and is for people with darker skin as shown on the skin tone chart—Skin Tone 3. € Setting IIII is the LOWEST power setting and is for people with darker skin as shown on the Skin Tone Chart—Skin Tone 4. NOTE: You can choose a higher number/darker tone setting (emits less light energy) than your Skin Tone Sensor measurement result, but a lower number/lighter skin tone setting cannot be selected.  Look away from the handset to avoid the bright light. You will hear a click and may feel a warm sensation.  eplace the Skin Tone Sensor in R the base unit. The Skin Tone Sensor button will illuminate WHITE which indicates that the unit is ready for use. The device setting will automatically adjust to the Skin Tone Sensor reading. [. . . ] To reactivate, take another valid skin tone reading as described on page 31 – 32 of this user guide. Venus Naked Skin® will display any error messages through combinations of lights on the control panel. The table below explains what these light combinations mean. 24 25 26 27 28 29 30 29 30 29 30 Maintenance Phase After your start-up phase, to maintain continuously smooth skin, use Venus Naked Skin® once every two months. [. . . ]