User manual BRAUN KF7125BK PURAROMA 7

[. . . ] 16 08:59 A 5 4 10 8 6 4 2 2-10 * 3 * not included AM 2 start timer calc clock set strong 1-4 a b c d e f g AM start timer calc clock set g stron 1-4 1 1 min. 16 13:48 English Our products are engineered to meet the highest standards of quality, functionality and design. We hope you thoroughly enjoy the new Braun appliance. Before use Please read instructions carefully and completely before using the appliance. [. . . ] € To switch off the coffee maker, press the On/Off button again. The green indicator light will turn off indicating that the coffee maker is in «stand by» mode. Auto Off Function For your convenience and also additional safety, the appliance will switch off automatically 1 minute after the brewing cycle is complete. Programming the Coffee Maker Before programming, always switch on the coffee maker. Note: The device features a 60-second power loss back-up system that remembers all programmed information, including time of day and the timer in the event of a tripped breaker, unit is unplugged, or power failure. Setting the Time When the coffee maker is first plugged in or when power is restored after an interruption, the LED control panel will start flashing 02:00. 16 13:48 Setting the Water Hardness Level Set the water hardness level on the coffee maker to the water hardness level for your local area. € Press the CALC button (c) for a minimum of 3 seconds. • The default setting (h3) will start flashing. € Press the SET button (e) to scroll through the options (h1 = soft, h2 = normal, h3 = hard) and select the appropriate water hardness level. € Press the CALC button again to save the hardness level. € The pre-set water hardness disappears after 3 seconds and the time of day will show on the LED control panel. 1 – 4 Cups Setting • Press the button (g). The green LED above the button will illuminate. • Press START (a) to start brewing. € The green LED turns off after the brewing cycle is finished. Brew Strength Selector • Press the STRONG button (f) to select brew strength «strong». € The green LED above the button will illuminate. € If the STRONG button is not pressed, regular coffee strength is automatically selected. Note: The anti-drip system halts the flow of coffee from the filter basket when the carafe is removed, so a cup can be poured before brewing is finished. The carafe should be returned to the carafe stand (maximum 20 seconds) to prevent the filter basket from overflowing. For Best Results • When using paper filters, be sure that it is completely open and fully inserted in the basket. [. . . ] START does not light up Potential Causes • The appliance is unplugged • There was a power outage • ON/OFF button was not pressed The appliance is unplugged Initial operation or there was a power outage • ON/OFF button is not pressed • Clock has not been set • ON/OFF button was not pressed • The TIMER has not been set • The appliance is unplugged • There was a power outage • ON/OFF button was not pressed and the START button was not pressed • • • • The appliance is unplugged There was a power outage START button was not pressed There is no water in the reservoir Solution • Plug unit in • Wait for power to be restored • Press ON/OFF button Plug unit in Set clock • Press ON/OFF button • Set clock time • Press ON/OFF button • Set the TIMER • Plug unit in • Wait for power to be restored press ON/OFF button, followed by START. € The need for repair has not been caused by insufficient aftercare or cleaning: or damage caused by the chemical or electrochemical effects of water. Under no circumstances shall the application of this guarantee give rise to the complete replacement of the appliance or entitle the consumer to damages. Braun Household, New Lane, Havant, Hampshire PO9 2NH For UK Only Guarantee Information All Braun Household products carry a minimum guarantee period of two years. [. . . ]