User manual BRAUN MR 5550 CA

[. . . ] 10 When mixing liquids, especially hot liquids, use a tall container or make small quantities at a time to avoid splattering and burning. Keep hands and utensils out of the container while blending with the shaft to prevent the possibility of severe personal injury and/or damage to the unit. A rubber spatula may be used but only when the unit is not running. To avoid injury, never place the blade unit on the base without first putting the chopper bowl properly in place. [. . . ] Insert the whisk J into the whisk gear box I , then insert the motor part A into the gear box until it locks into place. Place the whisk in a bowl before pressing the on/off switch B to turn on the whisk. To release the wisk, press the release knobs D and pull off the gear box. Then pull the whisk out of the gear box. Only whip up to 400 ml (14 oz) chilled cream at one time. Move the whisk clockwise when mixing ingredients. How to operate your chopper attachment Motor part On/off switch for variable speed On/off switch for turbo speed Quick release buttons Variable speed regulator Blender shaft Wall mount Measuring beaker with airtight lid Whisk gear box Whisk Chopper The chopper is perfectly suited for chopping meat, cheese, onions, herbs, garlic, carrots, walnuts, hazelnuts, almonds etc. Parmesan cheese, chocolate), use the on/off turbo switch C . : Do not chop extremely hard food, such as ice cubes, nutmeg or coffee beans. Cut meat, cheese, onions, garlic, carrots into small pieces (see table page 3) · Remove stems from herbs, shell nuts · Press it straight down until it locks into place. Put the gear box (a) on the chopper bowl. Insert the motor part A into gear box (a) until it locks into place. During processing, hold the motor part with one hand and the chopper bowl with the other. After use, press the release knobs D to detach the motor part. Then remove the processed food from the chopper bowl. When activating the on/off switch B , the processing speed corresponds to the setting of the variable speed regulator E . The higher the setting, the faster the chopping results. However, maximum processing speed can only be achieved by pressing the turbo switch C . You may also use the turbo switch for instant powerful pulses without having to adjust the variable speed regulator. How to operate your handblender The handblender is perfectly suited for preparing dips, sauces, soups, mayonnaise and baby food as well as for mixing drinks and milk shakes. Wipe the motor part A and the whisk gear box I with a damp cloth only. The chopper gear box (a) may be rinsed under the tap. [. . . ] The cost to ship the product to an authorized Service Center is the responsibility of the consumer, the cost to return the product to the consumer is the responsibility of Braun. This warranty does not cover finishes, normal wear, nor does it cover damage resulting from accident, misuse, dirt, water, tampering, unreasonable use, service performed or attempted by unauthorized service centers, failure to provide reasonable and necessary maintenance, including recharging, or units that have been modified or used for commercial purposes. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation may not apply to you. This warranty gives you specific legal rights, and you may have other legal rights which vary from state to state. [. . . ]