User manual BRAUN SERIES 5 590

[. . . ] Our products are designed to meet the highest standards of quality, functionality and design. Thank you for your trust in Braun's quality and we hope you enjoy your new Braun shaver. Read these instructions completely, they contain safety information. Warning Your appliance is provided with a special cord set, which has an integrated Safety Extra Low Voltage power supply. [. . . ] Press the lift button (13) at the rear side of the Clean&Charge Station to lift up the housing. Hold the cleaning cartridge (17) down on a flat, stable surface (e. Carefully remove the lid from the cartridge. Slide the cartridge from the rear side into the base Of the station until it snaps into place. Slowly close the housing by pushing it down until it locks. Charging the shaver in the Clean&Charge Station (see fig. d) Insert the shaver head down into the cleaning station. Important: The shaver needs to be dry and free from any foam or soap residue!The contacts (7) on the back of the shaver need to align with the contacts (14) in the station. Push the shaver in the correct position. A beep sound confirms that the shaver sits properly in the station. Model 5090cc: The Clean&Charge Station analyzes the hygiene status. The status is shown by the cleaning program indicators in the Clean&Charge Station display (15) more details see chapter «Cleaning programs» below. When the cleaning indicator lights up in the shaver display, insert the shaver into the Clean&Charge Station, upside down and with the front showing (with released head lock/contact alignment/beep sound). cleaning programs 5090cc: The hygiene status will be analyzed and one of the following program indicators will light up. Short economical cleaning normal level of cleaning high intensive cleaning Start the cleaning process by pressing the start button (16). If status light (15a) does not shine (Clean&Charge Station switches to stand-by after ca. 10 minutes) , press start button twice. For best shaving results, we recommend cleaning after each shave. Each cleaning program consists of several cycles, where cleaning fluid is flushed through the shaver head. Depending on your Clean&Charge Station model and/or program selected, the cleaning time takes up to 3 minutes. During this time the status light Leave the shaver in the station for drying. [. . . ] Within the guarantee period we will eliminate any defects in the appliance resulting from faults in materials or workmanship, free of charge either by repairing or replacing the complete appliance at our discretion. This guarantee extends to every country where this appliance is supplied by Braun or its appointed distributor. This guarantee does not cover: damage due to improper use, normal wear or use as well as defects that have a negligible effect on the value or operation of the appliance. The guarantee becomes void if repairs are undertaken by unauthorised persons and if original Braun parts are not used. [. . . ]