User manual BRAUN SI 17780

[. . . ] ⷠMake sure your voltage corresponds to the voltage printed on the iron. ⷠAlways unplug the iron before filling with water. ⷠThe cord should never come in contact with hot objects or the sole plate. ⷠNever immerse the iron in water or other liquids. [. . . ] Press the Precision Shot button in intervals of at least 5 seconds for a powerful steam shot with preconditioning steam. Precision Shot can be activated when dry ironing. However, the temperature selector has to be within the solid red range. 1 2 3 4 5 6 7 8 9 10 Preconditioning nozzles Spray nozzle Water tank opening Precision Shot button Spray button Steam regulator Temperature selector Temperature pilot light Heel rest Textile Protector (only with SI 17780 model) (SI 17780 model only) Before attaching the Textile Protector (10) for the first time, iron approximately 2 minutes without Textile Protector. The Braun Textile Protector protects delicate fabrics from heat damage and makes it possible to iron most dark fabrics without an intermediate cloth. a special coating avoids shiny patches. However, in order not to damage the coating, avoid ironing over e. To check the reaction of your fabrics before you start ironing, we recommend that you iron a small section of material on the reverse side. With the Protector, you are able to iron delicate fabrics with the temperature setting within the solid red range so that you can use all steam functions your iron offers. After having attached the Textile Protector, wait about 1 1/2 minutes before you start ironing. Always store your iron with the Textile Protector detached. Firmly push down the steam regulator until it turns back to setting «6» (fig. Notice: The iron must never be used without steam regulator. In order to clean the steam chamber from residues, decalcify it as shown in picture section H, 1-8. Caution: Hot water and steam will come out from the sole plate when the steam regulator is turned clockwise beyond setting «6». Wait for the sole plate to cool down, then clean it as described above. Then refill the tank with water, heat up the iron and press the precision shot button 4 times to rinse the iron before ironing (fig. Do not use commercial decalcifiers, they may damage the iron. [. . . ] this product conforms to the European Directives EMC 89/336/EEC and Low Voltage 73/23 EEC. Please do not dispose of the product in the household waste at the end of its useful life. Disposal can take place at a Braun Service Centre or at appropriate collection points provided in your country. Within the guarantee period we will eliminate, free of charge, any defects in the appliance resulting from faults in materials or workmanship, either by repairing or replacing the complete appliance as we may choose. [. . . ]