User manual BRAUN SI 9720

[. . . ] This appliance is not intended for use by children or persons with reduced physical or mental capabilities, unless they are given supervision by a person responsible for their safety. high temperatures and hot steam could lead to burns. Caution: Steam hose, steam boiler and especially the iron stand get hot during use. Steam ironing can cause condensation water which may drop from the back of the iron board onto the floor. [. . . ] ⷠWhen pressing the steam button (6), steam will be released from the sole plate (d). ⷠYou can adjust the steam quantity using the steam regulator (2). ⷠWhen starting the ironing session or when you have not used the steam function for some time, the steam still present in the supply hose will condense into water. This may cause some spluttering in the appliance and a few drops of water may come out from the sole plate. Before starting ironing just hold the iron over a cloth and press the steam control button until the steam production has normalised. 1 2 3 4 5 On/off switch (green pilot light) Steam regulator Water low indicator (red pilot light) Steam pilot light (orange) Iron stand Dry ironing If you want to iron without steam, do not press the steam button (6). Vertical steam Hanging curtains and clothes (jackets, suits, coats) can be steam-ironed to remove wrinkles. set the temperature selector within the red section. Hold the iron vertically, press the steam button while passing over the material in up and down movements. Textile Protector (SI 9720 model only) The Textile Protector (18) protects delicate fabrics from heat damage and makes it possible to iron most dark fabrics without an intermediate cloth. To check the reaction of your fabrics before you start ironing, we recommend that you iron a small section of material on the reverse side. With the Textile protector, you are able to iron most delicate fabrics with the temperature setting «· After having attached the Textile Protector, wait about 1 1/2 minutes before you start ironing. Always store your iron with the Textile Protector detached. Refilling the water tank When pushing the steam button with a low water level in the tank, the water low indicator (3) will light up. Then the steam function is blocked until the water tank is refilled. ⷠPress the on/off switch (1) to turn off the appliance before refilling (e). ⷠRefill the water tank to the «max» marking as described above, then switch on the appliance again. 5 l tap water, shake the boiler to rinse well, then empty it. Repeat the process until no more calcium particles come out from the boiler. After cleaning the boiler, remove the funnel, screw the steel cap back into the boiler opening (clockwise) and put on the silicone cap again. Problem Drops coming out of the steam vents Help When you start ironing or after ironing breaks, this is normal (hose is cold ­ steam condenses). Make sure that water tank is correctly inserted and filled with water. [. . . ] this product conforms to the European Directives EMC 2004/108/EC and Low Voltage 2006/95/EC. Please do not dispose of the product in the household waste at the end of its useful life. Disposal can take place at a Braun Service Centre or at appropriate collection points provided in your country. Within the guarantee period we will eliminate, free of charge, any defects in the appliance resulting from faults in materials or workmanship, either by repairing or replacing the complete appliance as we may choose. [. . . ]