User manual BRAUN SI18890

[. . . ] ⷠThe iron must be used and rested on a stable surface. ⷠDuring ironing pauses, always place the iron upright on its heel rest and ensure that the heel rest is placed on a stable surface. ⷠThe iron must not be left unattended while it is connected to the mains supply. ⷠThis appliance is not intended for use by children or persons with reduced physical, sensory or mental capabilities, unless they are given supervision by a person responsible for their safety. [. . . ] Press the precision shot button in intervals of at least 5 seconds for a powerful steam shot with preconditioning steam. Precision shot can be activated when dry ironing. However, the temperature selector has to be within the solid red range. The precision shot function can also be used in the vertical position for steaming hanging clothes. 1 2 3 4 5 6 9 Preconditioning nozzles Spray nozzle Water tank opening Precision shot button Spray button Steam regulator With the Soft Textile Protector attached, you can iron all ironable fabrics without an intermediate cloth. Creases of delicate business suits without having to use an ironing cloth. With the Soft Textile Protector, you are able to iron delicate fabrics with the temperature setting within the solid red range so that you can use all steam functions your iron offers. However, in order not to damage the SoftTouch cushion, avoid ironing over e. (* in order to know whether a piece of garment is ironable, please refer to its care label. This is normal and in no case indicates a fault of the iron. The red «auto-off» light (9) will flash when the automatic shut-off is activated. This happens when the iron has rested ­ horizontally on its sole plate for about 30 seconds or ­ vertically on its heel rest for about 8 minutes. To turn on the iron again, just move it. When the «auto-off» pilot light stops flashing, the electrical power is on again. The automatic shut-off will be activated approximately 2 minutes after the iron is plugged into a socket. To prolong the life of the iron, empty the water tank. Store the cool iron in a dry place always standing on its heel rest. To clean the sole plate, use steel wool. Never use a scouring pad, vinegar or other chemicals. To clean the soft material on the handle, use soapy water. Textile Protector (11) (only with 780, 770 and 760 models) The Textile Protector protects delicate fabrics from heat damage so that you can iron most fabrics without an intermediate cloth. a special coating avoids shiny patches. [. . . ] Notice: The iron must never be used without steam regulator. In order to clean the steam chamber from residues, decalcify it as shown in picture section I, 1-8. Caution: Hot water and steam will come out from the sole plate when the steam regulator is turned clockwise beyond setting «6». Wait for the sole plate to cool down, then clean it as described above. [. . . ]