User manual BRAUN SI6590

[. . . ] Before using the iron, read the use instruc- 3) Remove carefully (some water may now leak from the sole plate). 6) Use a non-metallic brush until all openings are clean. Note: the iron must never be used without the steam button. [. . . ] 6) ­ 7) Hold the iron over a sink, then press the steam button so it is lifted, carefully pull it up, turn it and rest it in this position. Caution: When the steam button is pulled up, hot water and steam will come out from the sole plate. 8) Push back the steam button until it catches in the lower position. 11) ­ 13) When the pilot light goes off, press the power shot button 4 times to rinse the iron. Disconnect the iron and wait for the sole plate to cool off, then clean it as described above in section E. Note: the iron must never be used without the steam button. 1 2 3 3a 4 5 6 7 Spray nozzle Water tank opening Steam button Steam regulator Spray button Power shot button Temperature selector Temperature pilot light Do not add any additives (e. Select the temperature according to the ironing guide on the heel rest of the iron or on the label in your garments. ⷠThe temperature pilot light (7) goes off, 1 Steam on/off For steam ironing, the temperature selector (6) must be set within the red range. With the steam button in its upper position, turn the steam regulator (3a) to adjust the steam quantity. preconditioning Steam develops also horizontally at the front area of the sole plate. This preconditions the textiles by «pre-steaming», thus making ironing easier. Be careful ­ steam comes out laterally. 2 Power shot Prior to use, press the power shot button (5) 3 to 4 times to activate it. Press the power shot button in intervals of at least 5 seconds. Power shot can be activated when dry ironing. However, the temperature selector has to be set in the range between «· The power shot function can also be used in the vertical position for steaming hanging clothes. 3 Spray function Press the spray button (4). [. . . ] The Braun Textile Protector protects delicate fabrics from heat damage and makes it possible to iron most dark fabrics without an intermediate cloth. To check the reaction of your fabrics before you start ironing, we recommend that you iron a small section of material on the reverse side. With the Protector, you are able to iron delicate fabrics with the temperature setting «· » or «max», so that you can use all steam functions your iron offers. [. . . ]