User manual BREIL AS10

[. . . ] Pull the crown out to Position (1) to check the 0-position (function hand and date wheel correction mode). Confirm that the 24 hour hand, hour hand, minute hand, second hand and function hand rapidly advance to the 0 position, and the date wheel displays "1". 0 Positions of each Hand (Base Positions): 24 hour hand: 24:00 Hour hand, minute hand: 00:00 Second hand: 00 seconds Function hand: 0 position (12:00 position) Date wheel: 1st Perform the "0-Position Correction" when the hands and date wheel are not at the positions indicated above. Pull the crown out to Position (1) in the chronograph [CHR] mode to correct the function hand and date wheel. [. . . ] When stopping the hand, click the crown once to the right or left. When the hand is not stopped manually, it stops automatically after being advanced 31 days. Return the crown to the normal position after setting the date. The watch will resume keeping time once the second hand catches up to the current seconds. When the watch is set to a date that does not exist (February 30, for example), the watch automatically switches to the 1st day of the following month when the crown is returned to the normal position. 95 seconds in 1/20th second units, after which it resets to 0 seconds. When the crown is turned and the mode hand is set to the chronograph [CHR] mode, the second hand and function hand are rapidly advanced to the 0 position and the watch enters the chronograph mode. Second hand: Switches to the chronograph second hand. The second hand advances rapidly and makes one revolution only when starting at 0 seconds, after which it moves in 1 second increments to measure chronograph seconds · When button is pressed when the chronograph is stopped, the function hand switches to 1/20th seconds display during time button is pressed. Note: 24 hour hand, hour hand, minute hand, date wheel: · Continues to display the current time when the watch has been switched from the time/calendar mode. ⷠContinues to display local time when the watch has been switched from the local time mode. ⷠContinues to display the alarm set time when the watch has been switched form the alarm mode. Continuously pressing button when the chronograph is stopped causes the chronograph second hand and chronograph minute hand to be reset to the 0 position. The local time function allows the time in a different time zone to be set separately from the current time. Local time is set by performing a time difference correction in 1 hour units based on the current time (time of the time mode/TME). The minute and second hands move in coordination with the current time. Click the crown to the right or left to correct the time difference. ⷠWhen the crown is clicked to the right, the hour hand moves by 1 hour in the clockwise direction. ⷠWhen the crown is clicked to the left, the hour hand moves by 1 hour in the counter-clockwise direction. Note: The hour hand is not advanced rapidly even if the crown is continuously clicked two or more times. perform correction accurately 1 hour at a time. Furthermore, the range of time difference correction is ± 23 hours based on the current time. [. . . ] Can withstand spray, sweat, light rain, washing, etc. During daily use Can be worn while swimming but not diving Suitable for skin-diving. * Always keep the crown in its normal position. - Contact with water may cause a deterioration in the quality of some leather straps. [. . . ]