User manual BRIGGS & STRATTON 1950 PSI REV 1

[. . . ] A warning tag (Figure 1) is provided on your unit to inform you of potential safety hazards. If the tag becomes damaged or illegible, replace it by contacting your local Briggs & Stratton dealer to obtain a new one. Read this manual carefully and become familiar with your pressure washer. Know its applications, its limitations and any hazards involved. [. . . ] Keep exhaust gas from entering a confined area through windows, doors, ventilation intakes or other openings. DO NOT operate pressure washer inside any building or enclosure. DO NOT run the pump without the water supply connected and turned on. Damage to equipment resulting from failure to follow this instruction will void warranty. The pressure washer must be at least 5 ft. (152 cm) from structures having combustible walls and/or other combustible materials. (92 cm) all around pressure washer including overhead , for adequate cooling , maintenance and servicing. Place pressure washer in a well ventilated area, which will allow for removal of deadly exhaust gas. DO NOT place pressure washer where exhaust gas could accumulate and enter inside or be drawn into a potentially occupied building. Ensure exhaust gas is kept away from any windows, doors, ventilation intakes or other openings that can allow exhaust gas to collect in a confined area (Figure 6). Prevailing winds and air currents should be taken into consideration when positioning pressure washer. Position nozzle in low pressure mode (see "How To Use Adjustable Nozzle") and squeeze trigger on spray gun to relieve air pressure caused by turning ON water. Water will flow out of spray gun in thin stream. continue to hold trigger until steady stream of water occurs and no air remains in system. This will make it easier to pull start the engine. Engage trigger lock to spray gun trigger (Figure 8). Squeeze trigger on spray gun to relieve trapped pressure in hose to avoid injury. You must attach all hoses before you start the engine. Starting the engine without all the hoses connected and without the water turned ON will damage the pump. Damage to equipment resulting from failure to follow this instruction will void warranty. Keep the chemical injection tube from coming in contact with the hot exhaust. When inserting the filter into a detergent solution bottle, route the tube so as to keep it from inadvertently contacting the hot exhaust. [. . . ] Parts only on 2nd year for consumer use of Portable Generator and Home Standby Generator System - Less than 10 KW, outside of European Union. The warranty period begins on the date of purchase by the first retail consumer or commercial end user, and continues for the period of time stated in the table above. "Consumer use" means personal residential household use by a retail consumer. "Commercial use" means all other uses, including use for commercial, income producing or rental purposes. [. . . ]