User manual BRIGGS & STRATTON 2.48 BA

[. . . ] 48 XC) 2 Recoil starter 3 Catcher bag 4 Assembly of handlebar 5 Cutting height adjustment / Indicator of cutting heigth 6 Petrol filter cap 7 Air cleaner 8 Cold starting primer 9 Operator presence bail arm 10 Deflector blate 11 Engine oil check/fill Congratulation Technical data Safety instructions Assembly Operation Maintenance Faults and how to remedy Spare parts Guarantee Service Declaration of Conformity 12 12 13-14 14 14-15 15 16 16 16 105 108-109 Congratulations on your purchase of a WOLF lawn mower. It is important that you read, fully understand and observe the following safety precautions and warnings. Careless or improper use of the machine may cause serious or fatal injury. The user is responsible for any accidents involving other people or other people`s property. [. . . ] Examine the area on which the machine is to be used and remove all objects which are capable of being contacted or thrown by the mower or its blade. Check the machine to make certain that all fasteners, bolts & nuts are tightly fitted; check also for signs of damage or serious wear. Observe the installation instructions when replacing parts - if in doubt always refer to your WOLF Service Centre. Examine the grass box regularly for wear or damage - replace as necessary. Mowers fitted with four-stroke engines must be provided with engine oil before the first start-up (see , , Filling Oil"). Do not refuel in any area where there may be a naked flame. Keep fuel only in purpose-designed containers. Do not refuel or remove the tank filler cap while the engine is running or when the machine is hot. Do not attempt to start the engine if gasoline spills out. Instead, the machine should be removed from the area where the petrol was spilled. Any attempt to start the mower should be delayed until the fuel vapours have evaporated. The throttle should be closed before switching off the engine. If the engine is equipped with a petrol shut-off valve then this be closed after mowing has been completed. Do not leave the mower in closed areas after switching off allow it to cool off in the open air before storing away. Never keep the machine with petrol in the tank within a building in which gasoline vapours may possibly come into contact with naked flames or sparks. Before leaving the mower remove the spark plug lead and - if fitted - the starting key. Never attempt to lift the mower with the engine running - nor with a hot engine - always remove the spark plug lead before lifting or carrying. When folding the mower handlebars, detach starter rope and make certain that the control cables are not snagged or stretched when folding or unfolding. Always carry out the engine oil change with the fuel tank empty and filler cap fitted. The engine should be warmed up prior to draining the oil to ensure all sludge deposits are drained away with the oil. Maintenance and cleaning of the equipment as well as removing the protection device may only be performed with the engine stopped and the spark plug lead and - if available - the starting key, removed. Note information on the chassis before cleaning and oil change! [. . . ] Raise and hold the safety bracket (J, 1). Pull starter grip (K) and return it slowly by hand. Raise and hold the safety bracket (J, 1). Pull starter grip (K) and return it slowly by hand. [. . . ]