User manual BRIGGS & STRATTON 80800 ILLUSTRATED PARTS LISTS

[. . . ] A signal word (DANGER, WARNING, or CAUTION) is used with the alert symbol to indicate the likelihood and the potential severity of injury. In addition, a hazard symbol may be used to represent the type of hazard. ( ) HAZARD SYMBOLS AND MEANINGS Fire Explosion Moving Parts DANGER indicates a hazard which, if not avoided, will result in death or serious injury. Toxic Fumes Hot Surface Shock WARNING indicates a hazard which, if not avoided, could result in death or serious injury. CAUTION indicates a hazard which, if not avoided, might result in minor or moderate injury. Kickback CAUTION, when used without the alert symbol, indicates a situation that could result in damage to the engine. (OVER) FORM MS -6445 -01/03 ENGINE SELECTION WARNING [8] WARNING All engine parts, including fuel cap, spark plug, muffler, air cleaner, and covers and guards for drive components (gears, belts, shafts, couplings, etc. ) must be in place before attempting to start engine. If engine is installed on walk behind lawn mower, all mower components, including cutting blade, must be correctly installed before attempting to start engine. [. . . ] If engine is installed on walk behind lawn mower, all mower components, including cutting blade, must be correctly installed before attempting to start engine. When working on the engine or equipment, remove spark plug wire from spark plug. For electric start, remove negative wire from battery. Do not check for spark with spark plug removed. Use Briggs & Stratton spark tester #19368. Failure to select the correct engine could result in fire or explosion. · Some engines are unique and designed for specific applications or types of equipment. If this engine will be used to build new equipment, contact Briggs & Stratton to ensure that the engine is appropriate for the intended use. Note: For all Go -karts use only a model 136200 series engine, which offers improved safety and performance. Keep gasoline away from sparks, open flames, pilot lights, heat, and other ignition sources. [4] WARNING Install muffler (and muffler deflector if used) so outlet points away from operator, fuel tank, and equipment, and so muffler heat will not damage or deform engine and components. Ensure all fuel lines and fittings are properly assembled and do not leak. Replacement parts must be the same model as the original. Ensure all wiring, including safety switches and engine shut-off components are completely installed and functioning properly. WARNING When starting engine: Remove all external equipment/engine loads. Pull cord slowly until resistance is felt, then pull rapidly. If engine floods, set choke to OPEN/RUN, place throttle in FAST and crank until engine starts. [5] WARNING [6] WARNING WARNING When operating equipment: Do not tip engine or equipment at angle which causes gasoline to spill. Do not run in enclosed area, even if doors or windows are open. [. . . ] Pull cord slowly until resistance is felt, then pull rapidly. If engine floods, set choke to OPEN/RUN, place throttle in FAST and crank until engine starts. [5] WARNING [6] WARNING WARNING When operating equipment: Do not tip engine or equipment at angle which causes gasoline to spill. Do not run in enclosed area, even if doors or windows are open. [. . . ]