User manual BRIGGS & STRATTON ZR ILLUSTRATED PARTS LISTS

[. . . ] This manual contains information for a high pressure washer that operates at 2, 700 PSI at a flow rate of 2. This powerful, high quality system features large 10" wheels, a pump equipped with an automatic cool down system, chemical injection system, nozzle extension with quick connect nozzles, safety goggles, heavy duty 25' hose, and more. Every effort has been made to ensure that information in this manual is accurate and current. However, we reserve the right to change, alter or otherwise improve the product and this document at any time without prior notice. [. . . ] There MUST be at least ten feet of unrestricted garden hose between the pressure washer inlet and any flow shut off device, such as a `Y' shut-off connector or other convenience-type water shut-off valve. Damage to equipment resulting from failure to follow this instruction will void warranty. Turn ON water, point gun in a safe direction and squeeze trigger to purge pump system of air and impurities. Before connecting garden hose to water inlet, inspect inlet screen (Figure 7). High pressure spray can cause paint chips or other particles to become airborne. Always wear safety goggles when using this equipment or in vicinity of where equipment is in use. Before starting the pressure washer, be sure you are wearing adequate safety goggles. Inspect inlet screen, DO NOT use if damaged, clean if dirty. Run water through garden hose for 30 seconds to clean out any debris. Be sure to read "Safety Rules" and "How To Use Your Pressure Washer" before using pressure washer. Check that oil has been added to the proper level in engine crankcase. Choose spray tip you want to use and insert it into nozzle extension. Engage safety latch to spray gun trigger (Figure 12). Figure 12 -- Spray Gun with Safety Latch Engaged Rapid retraction of starter cord (kickback) will pull hand and arm toward engine faster than you can let go. Broken bones, fractures, bruises or sprains could result. ALWAYS point gun in safe direction and squeeze spray gun trigger, to release pressure and avoid kickback each time, before starting engine. There is also a hook at the front of the accessory tray to hold your high pressure hose. The brush and turbo nozzle are NOT included with your pressure washer. You can buy these items as optional accessories. A pressure washer produces a high pressure spray which increases risk of injury and damage to unit. NEVER exchange spray tips without locking the safety latch on the trigger. Pull back collar on quick­connect and pull current spray tip off. [. . . ] See the engine operator's manual for instructions on how to properly prepare the engine for storage. Pump has following problems: failure to produce pressure, erratic pressure, chattering, loss of pressure, low water volume. Replace spray tip with high pressure spray tip. Replace spray tip with low pressure spray tip. [. . . ]