User manual BRITAX BABY-SAFE BELTED BASE

[. . . ] The seal of approval E (in a circle) and the approval number are located on the approval label (sticker on the child safety seat). € This approval will be invalidated if you make any modifications to the child safety seat. Only the manufacturer is permitted to make modifications to the child safety seat. utilisation dans le véhicule Danger! [. . . ] The diagonal belt section 12 is now positioned on the lap belt section 10. Tensioning the vehicle seat belt Pull on the diagonal belt section 12 to tension the entire vehicle seat belt. Grasp the light grey handle of the clamping flap 37. Push the clamping flap 37 down until it engages into the two safety hooks 39. The buckle 9 of the vehicle seat belt must not be positioned in the light blue belt guide 34. Pull on the adapter 33 to check that it is securely installed. Always retension the vehicle seat belt if the adapter 33 has worked loose after prolonged use. Adjusting the support leg Push the adjustment button 40 and pull out the support leg 36 until it rests firmly on the floor of the vehicle. The green mark must now be visible on the support leg foot 42. The support leg 36 must never be suspended in mid-air or supported by other objects. Also ensure that the support leg 36 does not raise the adapter 33 from the seat surface. 23 Engaging the baby seat Ensure that the top side of the adapter 33 is free of foreign bodies. Ensure that the handle 5 is in its upper position A. Lift the baby seat over the adapter 33 against the direction of travel (baby facing backwards). First engage the front locking bar X (head end) in the adapter 33. Incline the baby seat slightly forwards. Now lower the foot end until the rear locking bar X engages. The green mark must now be visible at the grey release button 41 . Pull on the baby seat to check it is fully engaged. 2 Removal Press the grey release button 41, tilting the baby seat slightly forwards so that the locking bar X disengages from the foot end. Now lift the baby seat from the adapter 33 towards the backrest. For day-to-day use, you can leave the adapter 33 installed in your vehicle. [. . . ] Please contact your retailer directly in the event of a warranty claim. He or she will give you the advice and support you need. when processing claims , product-specific depreciation rates will be applied. Please refer to our General Terms and Conditions which are available from your retailer. [. . . ]