User manual BRITAX FLAT FOLD HIGH CHAIR

[. . . ] The Britax trademark is the property of Britax Excelsior Limited - UK. Visit the Britax website at: http:/www. britax. com. au or email us at custserv@britax. com. au Due to the variations in the style and design of our products the illustrations used in this instruction booklet are generic. 12/06 c 2007 Copyright Britax Childcare Pty. Australia. KEEP INSTRUCTIONS IN A SAFE PLACE FOR FUTURE REFERENCE 08 4000816_D series R237 4000816_D FlatFold highChair. ind1-2 1-2 19/3/08 10:07:36 AM NOTES READ THESE INSTRUCTIONS CAREFULLY AND KEEP THEM FOR FUTURE REFERENCE. THE CORRECT USE AND MAINTENANCE OF THIS PRODUCT IS ESSENTIAL. WARNING THE CHILD SHOULD BE SECURED IN THE HIGH CHAIR AT ALL TIMES BY THE HARNESS, EITHER IN THE RECLINING OR UPRIGHT POSITION. [. . . ] · Double check assembly before placing child into high Chair. · Always ensure electrical cords, heaters, barbeques, fireplaces and other hot objects are guarded or out of reach. · Always keep your child in view while in the high Chair. · Always apply the brakes when using the high Chair. · When making adjustments to the high Chair, ensure that you and your child's body, fingers and toes are clear of any moving parts on the high Chair, otherwise they may be injured. 02 www. britax. com. au www. britax. com. au 07 4000816_D FlatFold highChair. ind3-4 3-4 19/3/08 10:07:37 AM CARE AND MAINTENANCE To prolong the life of your nursery product keep it clean and do not leave it in direct sunlight for extended periods. Trim may be cleaned using a damp sponge with soap or mild detergent. Allow to completely dry preferably away from direct sunlight before storing. In some climates the trims may be affected by mould and mildew. To help prevent this occurring, do not store the product if it is damp or wet. Always store the product in a well ventilated area. To maintain the safety of your nursery product, check regularly and seek prompt repair for bent, torn, worn or broken parts. Use only those parts and accessories approved by Steelcraft. Always check parts regularly for tightness of screws and other fasteners - tighten if required. ThIS PRODUCT IS NOT INTENDED FOR COMMERCIAL USE. A B C PARTS LIST 1 x Seat 1 x Tray 2 x Leg Tubes B A 1. ASSEMBLy A B To open the high chair hold the leg tube and pull outward until the rear legs lock, you will hear a click. Insert the front leg tube into the frame until the press buttons lock. TO SECURE yOUR ChILD WARNING: Use this harness at all times. A five-point harness is provided to restrain your child. To secure the child in the harness, push buckle (A) and (B) into the buckle housing (C) until the buckle prongs snap into position. [. . . ] Place child in seat and secure with harness (see section2). Slide tray onto armrests. WARNING DO NOT FORCE ThE TRAy AGAINST ThE ChILD. BE SURE BOTh ADjUSTMENT FINGERS ARE ENGAGED TO ThE ARMREST. 7. DO NOT ADjUST WITh ThE ChILD IN ThE ChAIR. [. . . ]