User manual BRITAX ISOFIX ADAPTER

[. . . ] 7 • The child safety seat has been designed, tested and certified to the requirements of the European Standard for Child Safety Equipment (ECE R 44/04). The seal of approval E (in a circle) and the approval number are located on the approval label (sticker on the child safety seat). € This approval shall be invalidated if you make any modifications to the child safety seat. No modifications may be made to the child safety seat other than by the manufacturer. [. . . ] If your vehicle has folding backrests, remove the insert guides before folding them down. Most malfunctions are caused by contamination in the insert guides and on the hooks. € 17 Push the adjustment button 40 and fold out the support leg 36. Push the green safety button 38 and the red release button 39 on the two locking arms 37 towards each other. This ensures that both hooks on the locking arm 37 are open and ready to use. Take hold of the ISOFIX base 33 with both hands. Push both locking arms 37 into the insert guides 34 until the arms engage on both sides. The green safety button 38 must now be visible on both sides. Pull on the ISOFIX base 33 to ensure it is engaged on both sides. Push the adjustment button 40 and pull out the support leg 36 until it rests firmly on the floor of the vehicle. The support leg 36 must never be suspended in mid-air or supported by other objects. Also ensure that the support leg 36 does not raise the ISOFIX base 33 from the seat surface. 21 Ensure that the top surface of the ISOFIX base 33 is free of foreign bodies. Ensure that the handle 5 is in the upper position A. Position the infant carrier on the ISOFIX base 33 against the direction of travel (baby facing backwards). The green mark must now be visible on the grey release button 41. The infant carrier can be locked into position only when the safety leg 36 is folded out Pull on the infant carrier to check it is fully engaged. 23 Removal Push the grey release button 41, lifting the infant carrier at the same time. For day-to-day use, you can leave the ISOFIX base 33 installed in your vehicle. Push the green safety button 38 and the red release button 39 on the two locking arms 37 towards each other. Swivel the locking arm 37 and the shock bar 35 downwards. This protects the locking arms 37 from damage Repliez le pied de maintien 36 sur la face inférieure et fixez-le. [. . . ] Please contact your retailer directly in the event of a warranty claim. He or she will give you the advice and support you need. when processing claims , product-specific depreciation rates will be applied. Please refer to our General Terms and Conditions which are available from your retailer. [. . . ]