User manual BRITAX ROMER KIDFIX

[. . . ] User instructions We are pleased that our KIDFIX may accompany your child safely through a new stage of his or her life. In order to protect your child correctly, the KIDFIX must always be used and installed as described in these instructions. If you have any further questions regarding its use, please feel free to contact us. 1 with the KIDFIX locking arms into the ISOFIX fastening points in the vehicle (semi-universal) 4 2. [. . . ] € all persons in the vehicle have their seat belts fastened. € the child safety seat is always secured when it is in the vehicle, even if no child is being transported. To protect your vehicle • Some vehicle seat covers of sensitive materials (e. ) may develop wear marks when child seats are used. This can be avoided by placing a blanket or towel under the child seat. 1 Fastening with the KIDFIX locking arms The KIDFIX is installed permanently in the vehicle with the KIDFIX locking arms. Your child is then buckled into the child seat with the vehicle's 3-point seatbelt. σ Clip the two insert guides 16*, recess facing upwards, to the two ISOFIX fastening points 20. The ISOFIX fastening points 20 are located between the surface and the backrest of the vehicle seat. * The insert guides make it easier to install the seat using ISOFIX and prevent the seat cover from becoming damaged. When not in use, they should be removed and kept in a safe place. If your vehicle has folding backrests, remove the insert guides before folding them down. Most malfunctions are caused by contamination in the insert guides and on the hooks. σ Grasp the seat surface though the access slot in the cover. σ Push the KIDFIX locking arms 15 out all the way. σ Pivot the KIDFIX locking arms 15 180° to the rear. σ Push the green safety button 22 and the red release button 23 on both KIDFIX locking arms 15 towards each other. This ensures that both hooks on the KIDFIX locking arms 15 are open and ready to use. σ Push both KIDFIX locking arms 15 into the insert guides 16, until the KIDFIX locking arms 15 engage on both sides. The green safety button 22 must now be visible on both sides. σ Push the seat cushion 1 to the rear against the backrest of the vehicle seat (see 3. σ Pull on the seat cushion 1 to ensure it is engaged on both sides. [. . . ] The Britax/RÖMER accessories programme includes a drink holder 24, which can be fitted on the child seat subsequently. Hierbei handelt es sich um keinen Material-Fehler, sondern um normale For this car/bicycle child seat / pushchair we provide a 2-year warranty against manufacturing or material defects. The warranty period is effective from the day of purchase. As proof we ask that you fill out the Warranty Card and retain it for the whole term of the warranty period, together with the Transfer Check signed by you and your sales receipt. [. . . ]