User manual BRITAX SAFEFIX PLUS

[. . . ] We are pleased that our SAFEFIX plus may accompany your child safely through a new stage of his or her life. In order to protect your child correctly, the SAFEFIX plus must always be used and installed as described in these instructions. If you have any further questions regarding its use, please feel free to contact us. 1 with ISOFIX fastening and support leg (semi-universal) . [. . . ] Place the lap belt section 14 in the light red belt guides 15 on both sides of the seat base 12. The vehicle seat buckle 13 must not be positioned in the belt guide 15. Press down the clamping lever 17 of the dark red belt clamp 18 on the side of the vehicle seat buckle 13. Insert the diagonal seat belt section 16 into the belt clamp 18. Place the diagonal seat belt section 16 on the other side into the dark red belt guide 40. Use your knee to press the child seat into the vehicle seat. Pull firmly on the diagonal seat belt section 16, at the same time pulling up on the clamping lever 17 until it engages. The diagonal seat belt section 16 may only be clamped using the belt clamp 18 on the side of the vehicle seat buckle 13. Turn the turning handle 9 anticlockwise and pull out the support leg 6 until it rests firmly on the floor of the vehicle. The support leg 6 must never be suspended in mid-air or supported by other objects. Also ensure that the support leg 6 does not raise the child seat from the seat surface. Pull up on the adjustment handle 10 and push back the seat shell 11. Of course, you can also use the child seat in reclining position (see 5. Pull on the child seat to check that it is securely installed. Turn the turning handle 9 anti-clockwise and fold back the support leg 6. Pull up on the adjustment handle 10 and pull the seat shell 11 forward into the reclining position (see 5. Take the diagonal seat belt section 16 of the dark red belt guide 40 and give it a brief jerk. Remove the vehicle seat belt from the belt guides. Fold the support leg 6 onto the bottom side of the seat base 12. 6 To correctly install your child safety seat using the 3point belt For the safety of your child, please check that. The child safety seat is securely fastened in the vehicle, · The vehicle seat belt is tightened up and not twisted, The lap belt section 14 runs through both light red belt guides 15, · The diagonal belt section 16 is clamped with the dark red belt clamp 18 only, which is on the side of the vehicle seat buckle 13, The diagonal belt section 16 runs through the dark red belt guide 40 only, which is on the side opposite the vehicle seat buckle 13, Neither the buckle tongue nor the belt buckle 13 of the vehicle seat belt is positioned in the belt guides 15 of the child safety seat, The support leg 6 is firmly on the vehicle floor and the child seat does not move away from the seat surface, As a general rule: The more snugly the harness fits over your child's body, the safer your child will be. Please do not leave your child unattended in the child safety seat in the vehicle. [. . . ] Hook the metal part 37 into the long strap loop (first the long side and then the short side of the metal part 37). Pull the strap until the metal part 37 is seated squarely in the recess of the seat shell 11. Push through the shoulder straps 19 between the guide rod 39 and the base 32 of the headrest adjuster 21. Remove the connecting piece 42 from of the recess in the cover of the compartment for the user instructions. [. . . ]