User manual BROTHER HL-2400CN

[. . . ] Brother Color Laser Printer HL-2400C series USER'S GUIDE i USER'S GUIDE Trademarks Brother is a registered trademark of Brother Industries, Ltd. Apple and LaserWriter are registered trademarks, and TrueType is a trademark of Apple Computer, Inc. Centronics is a trademark of Genicom Corporation. EPSON is a registered trademark, and FX-850 and FX-80 are trademarks of Seiko Epson Corporation. [. . . ] Press the v or w button until the desired font appears on the display. Press the Set button to make the displayed selection effective. s If you select a resident bitmapped font (Letter Gothic 16. 66) or optional bitmapped fonts, the display shows the symbol set setting menu. s If you select resident scalable fonts or optional scalable fonts, the display shows the font style setting menu and then changes to the font size menu. Press the v or w button until the desired style appears on the display. Display Message Font Style Light Regular, Roman, Book, or Antique Bold or Demi Extrabold Italic or Oblique . . . . . . . . It Note The style indication appears after the font name and the style name differs according to the font name. The italic or oblique indication can appear after other style indication: "BdIt" indicates a bold italic font, "LtIt" indicates a light italic font, etc. 4­49 USER'S GUIDE Press the Set button to make the displayed selection effective, then the display shows the font size setting menu. Note When you have selected fixed-pitch fonts, you set the font size by the character pitch (width). When you have selected proportional spacing fonts, you set the font size in points (height). The display shows "PITCH" or "POINT" accordingly. The following displays show "PITCH" to simplify instructions. Press the v or w button until the desired font size appears on the display. Press the Set button to make the displayed selection effective. The blinking cursor then moves to the decimal part of the number. Press the v or w button until the desired decimal number appears on the display. Press the Set button to make the displayed selection effective. The display then shows the symbol set setting menu. When you enter the symbol set setting mode, the display first shows the current symbol set with an asterisk. Press the v or w button until the desired symbol set appears on the display. See "List of Symbol/Character Sets". Press the Set button to make the displayed selection effective. [. . . ] The number of characters for bar codes is limited as follows. EAN 8: EAN 13: UPC A: Total 8 digits (7 digits + 1 check digit) Total 13 digits (12 digits + 1 check digit) Total 12 digits (11 digits + 1 check digit) A number of characters other than above causes data error and the bar code data is printed as normal print data. If the check digit is incorrect, the printer calculates the correct check digit automatically so that the correct bar code data will be printed. When EAN13 is selected, adding "+" and a 2-or 5-digit number after the data can create an add-on code. [. . . ]