User manual BROTHER HL-6050D

[. . . ] Brother Laser Printer HL-6050 HL-6050D HL-6050DN User's Guide For visually-impaired users You can read this manual with Screen Reader `text-to-speech' software. You must set up the hardware and install the driver before you can use the printer. Please use the Quick Setup Guide to set up the printer. You can find a printed copy in the box or view it on the CD-ROM we have supplied. Please read this User's Guide thoroughly before you use the printer. [. . . ] ORIENTATION PRINT POSITION This printer can print pages in portrait or landscape orientation. PORTRAIT or LANDSCAPE This printer can be adjusted to align the page format. Subsetting X OFFSET=0 Description =-500, -499 . . . + 499, +500 Moves the print start position (at the top-left corner of pages) horizontally up to -500 (left) to +500 (right) dots in 300 dpi. + 499, +500 Moves the print start position (at the top-left corner of pages) vertically up to -500 (up) to +500 (down) dots in 300 dpi. COPIES Y OFFSET=0 AUTO FF TIME FF SUPPRESS HP LASERJET =OFF/1, 2, 3 . . . 99 (sec) Allows you to print the remaining data without pressing the Go button. =OFF/ON Turns the feed suppress (PAUSE) setting ON or OFF. FONT PITCH/POINT SYMBOL SET TABLE PRINT AUTO LF Description =I000 . . . Sets the symbol set or the character set. =OFF/ON ON: CR CR+LF, OFF: CR CR =OFF/ON ON: LF LF+CR, FF+CR, or VT VT+CR OFF: LF LF, FF FF, or VT VT =OFF/ON Selects whether a line feed and carriage return will happen when the printer reaches the right margin. =ON/OFF Selects whether a line feed and carriage return will happen when the printer position reaches the bottom margin. =## Sets the left margin at column 0 to 70 columns at 10 cpi. AUTO CR AUTO WRAP AUTO SKIP LEFT MARGIN CONTROL PANEL 3 - 17 PRINT MENU (Continued) Display Shows HP LASERJET (continued) Description Subsetting RIGHT MARGIN Description =## Sets the right margin at column 10 to 80 columns at 10 cpi. =#. ## Sets the top margin at a distance from the top edge of the paper: 0, 0. 33, 0. 5, 1. 0, 1. 5 or 2. 0. =#. ## Sets the bottom margin at a distance from the bottom edge of the paper - 0, 0. 33, 0. 5, 1. 0, 1. 5 or 2. 0. The factory setting is 0. 33(None-HP), 0. 5(HP). =### Sets the number of lines on each page from 5 to 128 lines. Sets the symbol set or the character set. =OFF/ON ON: CR CR+LF OFF: CR CR =OFF/ON Sets the left margin at column 0 to 70 columns at 10 cpi. Sets the right margin at column 10 to 80 columns at 10 cpi. Sets the top margin at a distance from the top edge of the paper - 0, 0. 33, 0. 5, 1. 0, 1. 5 or 2. 0. Sets the bottom margin at a distance from the bottom edge of the paper - 0, 0. 33, 0. 5, 1. 0, 1. 5 or 2. 0. Sets the number of lines on each page from 5 to 128 lines. TOP MARGIN BOTTOM MARGIN LINES EPSON FX-850 FONT NO. [. . . ] Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Call the dealer, Brother Customer Service or an experienced radio/TV technician for help. Important A shielded interface cable should be used to ensure compliance with the limits for a Class B digital device. Changes or modifications not expressly approved by Brother Industries, Ltd. could void the user's authority to operate the equipment. APPENDIX (FOR USA AND CANADA) C - 3 Industry Canada Compliance Statement (For Canada) This Class B digital apparatus complies with Canadian ICES-003. [. . . ]