User manual BROTHER HL-960

[. . . ] Brother Laser Printer HL-960 Series USER'S GUIDE I Trademarks Brother is a registered trademark of Brother Industries, Ltd. Apple and LaserWriter are registered trademarks, and TrueType is a trademark of Apple Computer, Inc. Centronics is a trademark of Genicom Corporation. EPSON is a registered trademark, and FX-850 and FX-80 are trademarks of Seiko Epson Corporation. [. . . ] When you enter the font setting mode, the display first shows the current font with an asterisk. 4­50 CHAPTER 4 CONTROL PANEL BROUGHAM * 5. Press the v or w switch until the desired font appears on the display. See "List of Fonts" on page 4-54. Press the SET switch to make the displayed selection effective. The steps you follow vary according to the font type, scalable or bitmapped. s If you select a resident bitmapped font (Letter Gothic 16. 66) or optional bitmapped fonts, the display shows the character set setting menu. CHARACTER SET Go to step 7. s If you select the resident scalable fonts or optional scalable fonts, the display shows the font style setting menu. BROUGHAM The display changes to the font style menu. BROUGHAM Reg * Press the v or w switch until the desired style appears on the display. Display Message Font Style Light Regular, Roman, Book, or Antique Bold or Demi Extrabold Italic or Oblique . . . . . . . . It 4­51 USER'S GUIDE Note The style indication appears after the font name and the style name differs according to the font name. The italic or oblique indication can appear after any style indication: "BdIt" indicates a bold italic font, "LtIt" indicates a light italic font, etc. Press the SET switch to make the displayed selection effective, then the display shows the font size setting menu. Note When you have selected fixed-pitch fonts, you set the font size by the character pitch (width). When you have selected proportional spacing fonts, you set the font size in points (height). The display shows "PITCH" or "POINT" accordingly. The following displays show "PITCH" to simplify instructions. PITCH= 10. 00 * Press the v or w switch until the desired font size appears on the display. Press the SET switch to make the displayed selection effective. Then the blinking cursor moves to the decimal part of the number. Press the v or w switch until the desired decimal number appears on the display. PITCH= 16. 66 Press the SET switch to make the displayed selection effective. The display then shows the character set setting menu. CHARACTER SET 7. When you enter the character set setting mode, the display first shows the current character set with an asterisk. 4­52 CHAPTER 4 CONTROL PANEL US ASCII * Note The character set varies according to the current emulation mode. The above display shows the factory setting in the EPSON FX-850 emulation mode. Press the v or w switch until the desired character set appears on the display. [. . . ] The first character must be "0" and the data must be terminated by a check digit. Total 8 digits = "0" + 6 digits + 1 check digit. (2) 6 digits The first character and the last check digit are removed from the 8 digit data. *1: For 8 digits, "?" can be used in place of a check digit. [. . . ]