User manual BROTHER MFC-410CN

[. . . ] USER'S GUIDE MFC-210C MFC-410CN Version A If you need to call Customer Service Please complete the following information for future reference: Model Number: MFC-210C and MFC-410CN (Circle your model number) Serial Number:* Date of Purchase: Place of Purchase: * The serial number is on the back of the unit. Retain this User's Guide with your sales receipt as a permanent record of your purchase, in the event of theft, fire or warranty service. Register your product on-line at http://www. brother. com/registration By registering your product with Brother, you will be recorded as the original owner of the product. ©1996-2004 Brother Industries, Ltd. THIS EQUIPMENT IS DESIGNED TO WORK WITH A TWO WIRE ANALOGUE PSTN LINE FITTED WITH THE APPROPRIATE CONNECTOR. APPROVAL INFORMATION Brother advises that this product may not function correctly in a country other than where it was originally purchased, and does not offer any warranty in the event that this product is used on public telecommunication lines in another country. Compilation and Publication Notice Under the supervision of Brother Industries Ltd. , this manual has been compiled and published, covering the latest product descriptions and specifications. The contents of this manual and the specifications of this product are subject to change without notice. Brother reserves the right to make changes without notice in the specifications and materials contained herein and shall not be responsible for any damages (including consequential) caused by reliance on the materials presented, including but not limited to typographical and other errors relating to the publication. i Safety precautions To use the MFC safely Please refer to these instructions for later reference and before attempting any maintenance. WARNING There are high voltage electrodes inside the MFC. [. . . ] Size is available for MFC-410CN only. 3 9 - 9 WALK-UP PHOTOCAPTURE CENTERTM Adjusting brightness 1 2 3 Press Menu/Set, 4, 3. Press Stop/Exit. Adjusting contrast You can choose the contrast setting. More contrast will make an image look sharper and more vivid. 1 2 3 Press Menu/Set, 4, 4. Press Stop/Exit. Colour enhancement (MFC-410CN only) You can turn on the colour enhancement feature to print more vivid images. Printing time will be slower. 1 2 Press Menu/Set, 4, 5. --OR-- Select Off and press Menu/Set, then go to Step 5. If you select On, you can customize the White Balance, Sharpness or Colour Density. WALK-UP PHOTOCAPTURE CENTERTM 9 - 10 3 4 5 Press or to select White Balance, Sharpness or Color Density. Press or to adjust the degree of the setting. Press Stop/Exit. White Balance This setting adjusts the hue of the white areas of an image. Lighting, camera settings and other influences will effect the appearance of white. The white areas of a picture may be slightly pink, yellow or some other colour. By using this adjustment you can correct this effect and bring the white areas back to pure white. Sharpness This setting enhances the detail of an image. It is similar to adjusting the fine focus on a camera. If the image is not in true focus and you cannot see the fine details of the picture, then adjust the sharpness. Colour Density This setting adjusts the total amount of colour in the image. You can increase or decrease the amount of colour in an image to improve a washed out or weak picture. 9 - 11 WALK-UP PHOTOCAPTURE CENTERTM Cropping If your photo is too long or wide to fit the available space on your selected layout, part of the image will be automatically cropped. If you want to print the whole image, turn this setting to Off. 1 2 3 For MFC-210C, press Menu/Set, 4, 5. Press Stop/Exit. ///////////////////////////////////////// ///////////////////////////////////////// Cropping:On Cropping:Off Borderless Printing time will be slightly slower. 1 2 3 For MFC-210C, press Menu/Set, 4, 6. Press Stop/Exit. WALK-UP PHOTOCAPTURE CENTERTM 9 - 12 Understanding the Error Messages Once you are familiar with the types of errors that can occur while you're using the PhotoCapture CenterTM, you can easily identify and troubleshoot any difficulties. When an error message appears on the LCD, the MFC will beep to get your attention. Media Error--This message will appear if you insert a media card that is either bad or not formatted, or when there is a problem with the media drive. [. . . ] 11-10 PhotoCapture CenterTM Difficulties . . . . . . . . . . . . . . . . 11-8, 11-9 Printing Received Faxes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-14 TX Lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-15 V Volume, setting . . . . . . . . . . . . . . . . . . . [. . . ]