User manual BROTHER MFC-8440

[. . . ] USER'S GUIDE MFC-8440 MFC-8640D MFC-8840D MFC-8840DN ® Version B If you need to call Customer Service Please complete the following information for future reference: Model Number: MFC-8440, MFC-8640D, MFC-8840D and MFC-8840DN (Circle your model number) Serial Number:* Date of Purchase: Place of Purchase: * The serial number is on the back of the unit. Retain this User's Guide with your sales receipt as a permanent record of your purchase, in the event of Register your product on-line at http://www. brother. com/registration By registering your product with Brother International Corporation, you will be recorded as the original owner of the product. Your registration with Brother: may serve as confirmation of the purchase date of your product should you lose your receipt; may support an insurance claim by you in the event of product loss covered by insurance; and, will help us notify you of enhancements to your product and special offers. The most convenient and efficient way to register your new product is on-line at http://www. brother. com/registration ©1996-2005 Brother Industries, Ltd. Brother numbers IMPORTANT For technical help, you must call the country where you bought the MFC. [. . . ] To include One-Touch or Speed-Dial numbers and manually dialed numbers in the same broadcast, you must press Set between each of the numbers. Use Search/Speed Dial to help you choose the numbers easily. (See Setting up Groups for Broadcasting on page 7-4. ) After the broadcast is finished, a Broadcast Report will be printed to let you know the results. Enter the long dialing sequence numbers as you would normally, but remember that each One-Touch and Speed-Dial number counts as one number, so the number of locations you can store becomes limited. If the memory is full, press Stop/Exit to stop the job or if more than one page has been scanned, press Start to send the portion that is in the memory. 1 2 3 If it is not illuminated in green, press (Fax). Place the original face up in the ADF, or face down on the scanner glass. Enter a number using One-Touch, Speed-Dial, a Group number, Search or manual dialing using the dial pad. (Example: Group number) When the LCD displays the fax number of the other party, press Set. You will be asked to press the next number. SETUP SEND 6 - 16 4 5 6 7 8 9 Enter the next number. (Example: Speed-Dial number) When the LCD displays the fax number of the other party, press Set. (Example: Manual dialing using the dial pad. ) Press Start. If you are using the scanner glass, go to Step 8. To send a single page, press 2 (or press Start again). --OR-- To send more than one page, press 1 and go to Step 9. Place the next page on the scanner glass. The MFC starts scanning and returns to Step 8. (Repeat Step 8 and 9 for each additional page). 6 - 17 SETUP SEND Overseas Mode If you are having difficulty sending a fax overseas due to possible interference on the phone line, we recommend that you turn on the Overseas Mode. After you send a fax using this feature, the feature will turn itself off. 1 If it is not illuminated in green, press (Fax). Place the original face up in the ADF, or face down on the scanner glass. 22. Setup Send 9. Overseas Mode 3 Press or to select On (or On Off). Select & Set 4 Press 1 if you want to choose more settings and the LCD will return to the Setup Send menu. --OR-- Press 2 if you have finished choosing settings, and then go to Step 5 5 Enter the fax number you're calling. [. . . ] 12-13 two-line phone system . . . . . . 1-19 W Warranties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . iii Canada . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . iii USA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . i V Volume, setting . . . . . . . . . . . . . . . . . . . 4-8 beeper . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-8 ring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]