Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual BROTHER NC-8100H. We hope that this BROTHER NC-8100H user guide will be useful to you.
Lastmanuals help download the user guide BROTHER NC-8100H.
Manual abstract: user guide BROTHER NC-8100HQUICK START
Detailed instructions for use are in the User's Guide.
[. . . ] To avoid such damage, use the following precautions when handling the board: · · Leave the NC-8100h in its anti-static bag until you are ready to install it. Make sure that you are adequately grounded before touching the NC-8100h. Use an anti-static wrist strap and a grounding mat if possible. [. . . ] Do not touch the surface of the network or main board.
3
10.
Plug the NC-8100h into connector P1 located on the main board as shown in the illustration. Make sure that both connectors are firmly together by pushing down the back of the NC-8100h.
11. 12.
Fit the two screws into the NC-8100h plate. Refit the metal cover over the main board, inserting it under the flat cable.
13.
Refit the two screws into the metal cover.
14. Reconnect the phone lines at the side of the machine. Reconnect any additional interface cables that you removed. Reconnect the power cable.
4
Step 2: Connecting the NC-8100h to an Unshielded Twisted Pair 10Base-T or 100Base-TX Ethernet Network
To connect the NC-8100h to a 10Base-T or 100Base-TX Network, you must have an Unshielded Twist Pair Cable. One side of the cable must be connected to a free port on your Ethernet hub and the other side must be connected to the 10Base-T or 100Base-TX connector (an RJ45 Connector) of the NC-8100h.
Verifying Successful hardware Installation:
Plug in the AC power cord. After initialization and warm-up (this may take several seconds), the machine will come to a Ready state.
Step 3: Installing the BRAdmin Professional: Configuration Utility
(For Windows® 9x, NT® 4. 0, Windows® 2000 and XP users only)
Note
If you have another operating system, refer to the NC-8100h User's Guide located on the CD-ROM with your MFC. Insert the CD-ROM into your CD-ROM Drive. The installation screen will automatically load. If possible, select the model number and language that you use. From the "Network Application for Optional NC-8100h" menu, select Install Software. From the "For Administrators" menu select BRAdmin Professional.
5
How to refer to the User's Guide
The NC-8100h User's Guide can be viewed from the CD-ROM supplied with your MFC in PDF. Insert the CD-ROM into your CD-ROM Drive. The installation screen will automatically load. [. . . ] The NC-8100h has a two color LED for diagnosing problems. LED · Orange LED: This LED will flash Orange when connected to a 100Base-TX Network and is receiving data. · Green LED: This LED will flash Green when connected to a 10Base-TX Network and is receiving data. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE BROTHER NC-8100H
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual BROTHER NC-8100H will begin.
