User manual BT CONVERSE 2100

[. . . ] · BT Converse 1200 telephone · Handset and cord (already fitted to base) · Telephone line cord (already fitted to base) · Desk mounting plinth · Wall mounting plugs and screws Hearing aid friendly The BT Converse 2100 is fitted with an inductive coupler so it is compatible with hearing aids. Please visit http://www. btplc. com/inclusion/ for further practical advice on using hearings aids. If you experience any problems, please visit www. bt. com/producthelp 4 In this guide Getting started Location. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Setting up . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Getting to know your phone Buttons and features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Using your phone Making and ending calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Hearing Aid compatibility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Make a call using a headset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Receive a call using a headset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Redialling the last number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Secrecy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Message waiting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Adjusting the ringer volume . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Adjusting the ringer tone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 R/Recall button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Amplify . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 M1-M3 memory buttons Store/replace a one touch number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Dial a one-touch memory number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Storing a pause in a number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Delete a stored number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Help . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 General information Safety information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Guarantee . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Returning your phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Technical information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 How many telephones can you have?. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Switchboard compatibility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 R&TTE Directive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Product disposal instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Wall mounting your phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 If you experience any problems, please visit www. bt. com/producthelp Getting started Location You need to place your BT Converse 2100 within 3 metres of a telephone socket so that the cable will reach. [. . . ] on the underside 7 indicator (on the Press to end the call. Receive a call using a headset 1. When the phone rings and the headset is plugged in, press Redialling the last number The redial number can up to 32 digits long. If the last number dialled was longer than 32 digits, only the first 32 digits will be dialled. Lift the handset, or press , then press . to answer. If you experience any problems, please visit www. bt. com/producthelp 8 Using the phone Secrecy During a call, you can talk to someone nearby without your caller hearing you. The red secrecy light (on the button) comes on and your caller cannot hear you. Press again to return to your caller. Message waiting If your BT Converse phone is connected to a switchboard, the message waiting indicator will flash when you receive new voicemail messages. BT 1571 or similar network voicemail users can also use this feature, however the indicator light will not flash. New voicemail messages will be indicated by a stuttered dial tone when you pick up the handset. Message waiting switch If your telephone is connected to a switchboard you may need to change the message waiting switch setting on the base of the phone. It is pre-set to MW3 which is for an SX2000 switch. MW1 and MW2 positions are for when the telephone is connected to an ISDX switch. If the switch is moved to MW2 and the message waiting indicator stays on permanently, use MW1. 1. Lift the handset, or press your answering service. and dial to connect to If in doubt, please refer to your PBX instructions/manager for the correct procedure to access this service. If you experience any problems, please visit www. bt. com/producthelp Using the phone 9 Adjusting the ringer volume 1. Set the Ringer Volume switch on the underside of the phone to 0 (Off), 1 or 2. Adjusting the ringer tone 1. Set the Ringer switch on the underside of the phone to 1 (Low), 2 (Medium) or 3 (High). R (Recall) The button is used to access a range of switchboard services, for example, to transfer calls and with some BT Calling Features. Press to switch the earpiece/headset volume between Normal and High. After you hang up, the volume will automatically return to Normal volume. If you experience any problems, please visit www. bt. com/producthelp 10 M1 ­ M3 memory buttons Each number can be up to 32 digits long and can include a pause or #. If you enter more than 32 digits you will hear an error beep. You can store your 3 most frequently used phone numbers on the one-touch memory buttons ( , and ) and dial them by pressing a single button. Store/replace a one touch number 1. or button you want until you hear a beep and the Secrecy light flashes. To enter a pause when storing a number press . 3. The number is To cancel while storing, hang up the handset . Any number already stored or press will be kept. stored. Lift the handset, or press The stored number is dialled. [. . . ] Drill two holes in the wall 70mm vertically apart using an 8mm drill bit. Insert the wall plugs if necessary, then insert the screws leaving about 5mm protruding from the wall on which to hang the phone. WALL WALL PLUG SCREW 70 mm 4. Slot the holes on the back of the base over the screw heads and gently pull the phone down to fix it securely in place. Using the handset park when the phone is wall-mounted If you need to leave the phone whilst on a call, hang the handset on the handset park at the top of the base. If you experience any problems, please visit www. bt. com/producthelp Offices worldwide The services described in this publication are subject to availability and may be modified from time to time. [. . . ]