User manual BT CONVERSE 225

[. . . ] To store a One-Touch number Press the Monitor button (or lift the handset). Press the One-Touch memory button under which you want to store the number. Enter the telephone number you want to store. Press the Monitor button (or replace the handset). [. . . ] Five of the One-Touch buttons have been pre-set with phone numbers for the following services: · 1471 ­ Call Return (No Charge) · Call Diversion (Quarterly subscription) · 1571 ­ Call Minder/BT Answer (Quarterly subscription/ No Charge) · Reminder Call (Pay per call) Note If you are not connected to the BT Network, some of the services may not be available. Please contact your Network Provider. Memory Service location 6 7 8 9 10 Code 1471 ­ Call Return 1471 Set Divert Cancel Divert 21 #21# Press the VOL + or VOL button to increase or decrease the volume of your caller's voice. Note To change a stored number, repeat the steps shown above. The new number will replace the existing One -Touch or Calling Features number. Recall button For use with a switchboard/PBX, e. g. to transfer calls and some BT Calling Features. Voice amplification Amplifies your callers voice when using the handset or headset. Hearing aid compatible Message Waiting indicator Your Converse handset is hearing aid compatible. 1571 ­ Call Minder/ BT Answer 1571 Reminder Call on Reminder Call off 55 #55# Note To adjust the ringer volume This feature is for compatible switchboard users only. When you have voice mail messages waiting the Message Waiting indicator will flash at regular constant intervals. To store a number longer than 21 digits Store the first 21 digits as shown above, then repeat the steps to store the remaining digits under another One-Touch number. To dial a One-Touch number Lift the handset (or press the Monitor button). Press the One-Touch button under which the number is stored. The number is dialled automatically. Safety information General Simply clean your Converse 225 with a damp (not wet) cloth, or an anti-static wipe. Never use household polish as this may damage the product. Never use a dry cloth as this may cause static shock. This could expose you to high voltages or other risks. We recommend that you do not place the product on antique/ veneered wood to avoid damage. Do not stand your product on carpets or other surfaces which generate fibres, or place it in locations preventing free flow of air over its surfaces. Do not submerge any part of your product in water and do not use it in damp or humid conditions, such as in bathrooms. Do not expose your product to fire, explosive or other hazardous conditions. Replace the handset on the base. Note Converse headsets (RJ11 jack) are available separately from BT shops or by calling 0870 240 5522. RINGER VOLUME Press the One-Touch memory button under which you want to store the number. Where you want to add a pause, press the P button. Press the Monitor button (or replace the handset). The number is stored. To receive a call When the telephone rings the Call indicator light will also flash to indicate that there is an incoming call. Simply pick up the handset. There are 3 volume settings to choose from HI, LOW or OFF. HI LOW OFF Plug the headset into the socket marked HEADSET on the underside of the base. To make a call, press the Headset button. Dial the telephone number. Use the Ringer volume switch on the underside of your Converse 225 to select either HI, LOW or OFF. [. . . ] If in doubt please consult your service provider. A copy of The Declaration of Conformance for the Converse 225 is available from TMX, Alpha Business Park, 28 White House Road, Ipswich, IP1 5LT. 4 Reconnect the telephone line to the line socket on the base of the phone. 5 Drill two holes in the wall To cancel a diversion Repeat steps 1 and 2 above. In the unlikely event of a defect occurring, please return the product, with the receipt, to the place of purchase. Outside of the 12 month guarantee period: BT Accessories and Replacement Items For a full range of accessories and replacement items for BT products please call 0870 240 5522, or visit: 60mm vertically apart using a 8mm drill bit. Offices worldwide Wall plug Screw Wall 60mm Note Call Diversion services may allow optional diverts. Refer to your Network Provider for details. If your product needs repair after the guarantee period has ended, the repair must meet the approval requirements for connection to the telephone network. We recommend that you contact BT's approved repair agent, TecLogic on 01672 564444 or a local qualified repairer. The telecommunications services described in this publication are subject to availability and may be modified from time to time. Services and equipment are provided subject to British Telecommunications plc's respective standard conditions of contract. [. . . ]