User manual BT DECOR 110

[. . . ] With different telephone types there is no guarantee of ringing, even when the REN is less than 4. Switchboard compatibility This product is intended for use within the UK for connection to the public telephone network and compatible switchboards, which support tone dialling and time break recall. If in doubt please consult your service provider. To delete stored numbers Lift the handset. Press the memory location number (0-9) or (M1, M2, M3) under which you have stored the number you wish to delete. [. . . ] Printed in China. This product is intended for connection to analogue public switched telephone networks and private switchboards in the United Kingdom. At a glance One-Touch memory buttons (M1, M2, M3) Allows you to store and automatically dial up to three numbers at the touch of one button. Quickdial button Allows you to dial up to ten numbers stored in the Quickdial memory at the touch of two buttons. Call indicator light Flashes to indicate an incoming call. Also flashes when storing numbers, using secrecy or setting the ringer. BT Decor 110 Setting up Plan the location of your BT Decor 110. Situate your BT Decor 110 close enough to a phone socket so that the line cord will reach. You can wall-mount your product, see back page. Your BT Decor 110 is now ready for use. One-Touch memories You can store your three most frequently used telephone numbers in the One-Touch memories (M1, M2 or M3). Please note that the number can be no longer than 18 digits. To store a One-Touch number Lift the handset. Press the memory location number, (M1, M2, M3), under which you want to store the number. Enter the telephone number you want to store including the area code if applicable. Replace the handset. Quickdial memories You can store a further 10 telephone numbers in the Quickdial memories. Please note that the numbers can be no longer than 18 digits long. To store a number in the Quickdial memory Lift the handset. Press the memory location number between 0 and 9 under which you want to store the number. Enter the telephone number you want to store including the area code if applicable. Plug your BT Decor 110 into the telephone socket. Store button Use to store numbers in the memory and to change the ringer and pitch volume. Recall button For use with a switchboard/PBX and BT Calling Features. Please contact your switchboard supplier for more information. For more information on BT's Calling Features please call Freefone 0800 800152 Secrecy button Lets you talk to someone in the same room without the person you are calling hearing you. Using the telephone Making and ending calls To make a call You can now talk to someone in the room without your caller hearing you. Press and release the SECRECY button again to return to your caller. To adjust the ringer volume There are 3 volume settings to choose from: HIGH, LOW or OFF. Lift the handset and press the STORE button. [. . . ] Press the memory location number, (M1, M2, M3), under which the number is stored. To insert a pause in a memory number Sometimes you may need to enter a pause when storing a number, e. g. with an overseas number you may need to enter a pause after storing the international code. Press the REDIAL button in the place where you want to enter a pause. [. . . ]