User manual BT DIVERSE 5000 SOLO

[. . . ] User Guide BT DIVERSE 5000 SOLO This equipment is not designed for making emergency telephone calls when the power fails. Alternative arrangements should be made for access to emergency services. This product is intended for connection to analogue public switched telephone networks and private switchboards in the UK. x At a glance Handset Handset display Displays the status of your handset. [. . . ] The found base confirmation screen, see below, will appear in approximately 60 seconds. A few seconds later the normal standby screen, see below, will appear. This confirms registration is complete. 9 Charge the handset You will need to fully charge your handset before you can use it for the first time. Leave the handset in the base station for approximately 16 hours to charge the battery pack. Battery performance Batteries and case may become warm during charging. Under ideal conditions, the handset batteries should give about 10 hours talktime or 100 hours standby time on a single charge. However, new NiCad batteries do not reach their full capacity until they have been in normal use for several days. The charge capacity of rechargeable batteries will reduce with time as they wear out, so reducing the talk/standby time of the handset. Eventually they will need to be replaced. New batteries are available from www. withandwithoutwires. com or call 0870 240 5522. If you replace the handset batteries with ones that have been fully charged, the battery indicator will not show full until the next charge cycle has been completed. Charge the handset until the batteries register full again. From then on the display will be correct. 4 Connect the telephone line cord to the base and plug into the wall socket Helpline Your BT Diverse 5000 Solo is now ready for use. However, if you experience any difficulties, please call the BT Diverse Helpline on 08457 908 070. 10 Signal strength The range of your BT Diverse 5000 Solo base station is 300 metres outdoors and up to 50 metres indoors under ideal conditions. If you go out of range the icon will flash on the display and you will need to move closer to the base station. 11 Visit us at www. bt. com 0682 CE compliant to R&TTE Directive (1999/5/EC) Offices worldwide The telecommunications services described in this publication are subject to availability and may be modified from time to time. Services and equipment are provided subject to British Telecommunications plc's respective standard conditions of contract. Nothing in this publication forms any part of any contract. © British Telecommunications plc 2003. Registered Office: 81 Newgate Street, London EC1A 7AJ. BT Diverse 5000 Solo Issue 2 (07/03) 1 Designed and produced by The Art & Design Partnership Ltd. Siemens number: A31008 ­ A100 ­ P101­1­7619 x Using the telephone Making and ending calls To make an external call Press the Talk button. You will hear the dial tone and the icon will appear in the display. Or. . . Preparatory dialling Enter the telephone number first and check that it is correct. Press the Talk button to dial the number. [. . . ] will disappear to indicate that the keyguard is switched OFF. 15 To manually register the BT Diverse 5000 Solo handset If automatic registration does not work or if the original handset has been replaced you will have to manually register the handset. Switch off the mains power at the wall socket and remove the power adaptor. Plug the power adaptor back into the wall socket and switch the power on. The registration display, see below, will appear. [. . . ]