User manual BT DIVERSE 6150

[. . . ] User Guide BT DIVERSE 6150 Welcome. . . to your BT Diverse 6150 digital cordless telephone answering machine Directory lets you store up to 50 names and numbers for easy dialling. Caller Display lets you see who's calling and your phone stores details of the last 30 callers in a Calls list. Answering machine can be operated from the handset, at the base or by remote access from another phone. You can have up to 5 GAP compatible handsets registered to your BT Diverse 6150 base. [. . . ] Either press UP or DOWN to display SMS RECEIVING SERVICE CENTRES. The pre-set number is stored under SMS Receive 1. Scroll UP or DOWN to highlight the option you want and press OK. 46 SMS texting 4. You can now enter a new number or edit an existing number. In some cases the numbers for the provider's SMS transmission and reception centre will be the same. Selecting a Send Service number If you have two Service Centre numbers stored you can choose which one you use to send a message. Your BT Diverse 6150 is pre-set to send using Send 1. Scroll DOWN to SMS SETTINGS and press OK. Display shows SELECT SMS SEND SERVICE CENTRE. 2. Scroll UP or DOWN to highlight the provider you want and press OK. Any messages sent will go via the selected provider. Answering machine You can operate your BT Diverse 6150 answering machine from: the base the handset Remotely from any external TouchtoneTM telephone. The factory setting for the answering machine is ON. Until you change your outgoing message, your callers will be greeted with the pre-recorded message `Hello, your call cannot be taken at the moment, so please leave your message after the tone'. Day, date and time An announcement of day, date and time of recording will be added automatically to each message and memo. If you do not set the day and the date and time the base display will flash CL to remind you that it has not been set. The date and time is also displayed on each handset. The day, date and time are set using a handset. Setting day, date and time using a handset 1. Scroll to TIME AND DATE SETTINGS and press OK. Press OK. If you subscribe to your network provider's Caller Display service, the date and time are set automatically when your BT Diverse 6150 receives its first call, but you will also need to set the day using a handset. 47 48 Answering machine 2. Scroll UP or DOWN until the current day is highlighted, then press Save. The new time will not appear on the other handsets until they go on-line or a call is received. Operating the answering machine from a handset You can use any registered BT Diverse 6150 handset to switch your answering machine on and off, hear your messages and adjust the answering machine settings. [. . . ] If in doubt please consult your service provider. Switchboard external line access code You may need to enter an access code (e. g. So that the switchboard has time to pick up an outside line, you may also need to add a `pause' after the access code. Insert a `pause' in a stored number If you need to add a pause in the dialling sequence, follow the example given below: 9 Switchboard code for an outside line P Pause inserted in dialling sequence 0870 240 3962 Rest of number When storing a number, at the point you want to insert a pause, press and hold 0 until P is displayed. [. . . ]