User manual BT FEATURELINE QUICK GUIDE

[. . . ] Note: This only controls the Message Indicator not the Call Minder service PROGRAMME P There are 8 keys, two are already programmed with Hold and Recall. The Hold key allows you to place a call on hold from your phone that gives your caller comfort beeps informing them that they are still connected to you. Whilst the call is on hold you can also hear the beeps, this is to remind you that you have a call on hold. The recall is provided if you need to use a manual recall. [. . . ] You also have three more options to Dial the number to Copy the number into your directory or Delete. If you choose to Copy the number into your directory you can also enter the name of the caller so that next time they call their name will be displayed. Use the keypad to enter the names and numbers. to enter the name John press 5 once, 6 three times, 4 twice and 6 twice. Use the arrow keys to edit your entry if required. The Programme key takes you into the setup options of the phone. One option this guide has not yet covered is programming the soft keys or programmable keys. 1 4 7 * 2 5 8 0 3 6 9 # FeatureLine & Embark Quick Reference Guide Position B for Pliant This is the greater angled position Position A for Pliant This is the lower angle position PROGRAMME P FeatureLine 8 page Spread 23/2/01 11:22 am Page 2 INSTALLATION AND BASIC SETUP Message key Used to access and control BT's Call Minder service Calls List key Use this key to check your call log (for use with BT's Caller Display service) 6 Programmable keys Directory key (note: Hold & Recall are Press to select or edit your stored names pre-programmed) and numbers (up to 50) Message waiting indicator (for use with BT's Call Minder service) Comes on when there is a new message. Flashes on an incoming call. USING YOUR PHONE There are several ways of making call:1. Dial the number and then lift the handset. Dial the number and then press handsfree. SCROLL Three way call At this point you have a few other options. If you do not wish to transfer the call immediately you can press "Return and hold" this will hold your second call and return you to your original call. Or you can press "Return and release" this will release your second call and return you to your original call. Or use "Three way call" to set-up a conference call between your original call, your second call and yourself. Your FeatureLine phone makes diverting calls easy. You can choose which type of divert required from the menu display. to divert all your calls select "Call diversion" then "Divert all calls". Enter the number to divert to, either an extension number or 9 and the external number. Note: The last number used will be offered. To change this enter the new number and press "Confirm" or press "Activate" to use the current number. "Cancel divert" only appears when "Divert all calls" is used. If "Divert on busy" or "Divert no reply" is selected the "Cancel" option via "Call diversion" must be used. Divert all Calls Divert on Busy Divert no Reply Active Cancel Check PROGRAMME IMPORTANT In order to work correctly the phone must be set to the correct type of FeatureLine. There are two types of FeatureLine: System X and System Y To determine which system you have just do the following:Press If you hear " Sorry, the service requested is not available" you are on System Y. [. . . ] Either dial the number or choose an option Redial Directory Caller List Redial: Choose from any of the last 12 numbers you have dialed Directory: Chose from the list in your own directory Caller List: Chose from the list of your callers 3. When your second call is answered select transfer from the options on-screen and your call is transferred. or -Transfer -Return and hold -Return and release PROGRAMME Transferring a Call 1. Press the Programming key. P Diverting Calls 6 Menu keys Used to select from the interactive menus (3 either side of screen) MESSAGE 2. [. . . ]