User manual BT FREESTYLE 65

[. . . ] This equipment is not designed for making emergency telephone calls when the power fails. Alternative arrangements should be made for access to emergency services. This product is intended for connection to analogue public switched telephone networks and private switchboards in the United Kingdom. Freestyle 65 Combined Cordless Telephone & Digital Answering Machine User Guide Please open this page for an `at a glance' guide to your Freestyle 65 Please open this page for a further `at a glance' guide to your Freestyle 65 At a glance Aerial Should be extended to obtain the best signal and reception available, see page 7. Light Indicates when the handset rings, is in use or, if the handset battery needs recharging, see page 8. Screen/Menu and Secrecy/Music on hold button Allows you to access the answering machine menu, see page 28. [. . . ] To select Answer and Record outgoing message, press the 5 button. The prompt will announce, "Your outgoing message is . . . . . . . . " ­ To hear main menu, press 1. ­ To hear the outgoing message menu, press 8. Press the SCREEN/MENU button. To select Answer Only outgoing message, press the 6 button. The prompt will announce, "Your outgoing message is . . . . . . . . " ­ To hear main menu, press 1. ­ To hear the outgoing message menu, press 8. Screen Menu Press the SCREEN/MENU button to return the handset to standby. Screen Menu Press the SCREEN/MENU button to return the handset to standby. 23 To delete your own outgoing message and re-instate the pre-recorded outgoing message via the base unit You can delete your personalised outgoing message and return to your Freestyle 65's pre-recorded outgoing message. First select the outgoing message you want to delete, see page 22. Whilst your selected outgoing message is playing press the DELETE button on the base unit. The message will stop playing and you will hear a short beep, then the default pre-recorded outgoing message. To delete your own outgoing message and re-instate the pre-recorded outgoing message via the handset Pick up the handset. Screen Menu Press the SCREEN/MENU button. The prompt will announce, "To play outgoing message, press 2". To play the currently selected outgoing message that you wish to replace. Whilst your outgoing message is being played you will hear a confirmation beep, followed by the voice prompt announcing the default pre-recorded outgoing message. Del Screen Menu Press the SCREEN/MENU button to return the handset to standby. 24 Using the Freestyle 65 answering machine via the base unit Note Press the STOP button at any time during playback to stop messages playing. Page Skip In Use Charging To pause a message during playback While listening to the message, press the PLAY button. To playback messages Press the PLAY button. The prompt will announce, "You have (n) messages". Your message(s) will be played back, starting with the first message received. At the start of each message, the number of the message is announced. The message number will also be shown on the base unit display. The message will be paused. You will hear a beep every 10 seconds and the message display will show P flashing. Press the PLAY button again to resume playback. 25 To skip forward and backward through messages (including fast forward playback) During playback: Skip To delete all messages Press the SKIP button to skip forwards to the next message. If you press and hold the SKIP button the current message will be played at 11/2 times the speed (fast forward playback). Press the SKIP button to return to the start of the current message. Press again to return to the start of the previous message. When all messages have been played the prompt will announce, "End of messages. To delete all messages, press delete". [. . . ] You may have pressed a number key on the handset after pressing the SCREEN/MENU button. The current handset will try to transfer the call to another handset. The handset needs recharging or there is an incoming call. Relocate the base unit or move around with the handset until reception improves. Don't press the TALK button when storing numbers, see page 13. [. . . ]