User manual BT PAPERJET 50E

[. . . ] PaperJet 50E Plain paper fax, copier and telephone User Guide This product is intended to be connected to analogue networks and private switching systems in the United Kingdom. This product has not been designed for making emergency telephone calls when the power fails. Alternative arrangements should be made for access to emergency services. 12 Month guarantee FOR ASSISTANCE CALL THE HELPLINE ON 0870 240 8026 quoting the model and serial number 1. In the event that the Helpline is unable to resolve a problem over the phone, the following will apply: I. [. . . ] ­ if a power failure occurs before sending when a document has been stored in the memory, or after a fax has been received into memory and not printed out, the report details the number of pages lost from the memory and the date and time of power failure. Activity report Provides details of the last 25 faxes sent and received. The report is printed automatically and you can request an activity report at any time. Transmission report Provides confirmation of the results of the last fax sent. You can set your PaperJet 50E to print a last transmission report after every fax, every failed fax, or upon request. Broadcasting report Contains details about the last broadcast fax sent (see page 26). It is printed automatically after each broadcast fax. Delayed transmission report This is a report that is printed automatically when you set a delayed transmission. It gives the number dialled and the time of the transmission. 25 What the report terms mean Reports contain the following information: Act. Each fax sent and received is given a number. The type of operation: TX, TX ECM, TX POLL, TX POLL ECM Type for faxes sent. RX, RX ECM, RX POLL, RX POLL ECM for faxes received. Reference number of document stored in the memory for sending. Dialled Number Fax number dialled. Received Id Number (and name if available) of the person called providing it has been stored on their fax machine. OK if fax was sent or received successfully. XX ERROR CODE if the fax did not go through properly. See page 41 for the meaning of the error codes. Date/Time Duration Pages Result To switch automatic printing of transmission and error reports on and off Press until the display shows FAX SET-UP Display shows DATE AND TIME Display shows VARIOUS SETTINGS Press until the display shows FAILED TX To switch automatic printing of delayed transmission on and off. Press until the display shows FAX SET-UP Display shows DATE AND TIME Display shows VARIOUS SETTINGS Press until the display shows REPORT Press to display the option you want DELAY LIST: OFF Press to switch between the ON and OFF settings. Press to return your machine to standby FAILED TX REPORT ­ print a report only after a fax has failed to be sent or received. TX REPORT ALWAYS ­ print a report after every received or sent fax. TX REPORT OFF ­ no reports will be printed. Press to confirm. Press to return your machine to standby. To request immediate print-outs To switch automatic printing of broadcast reports on and off Press until the display shows FAX SET-UP Display shows DATE AND TIME. [. . . ] Use a slightly damp cloth to clean the electrical contacts of the carriage inside the machine. Replace the cartridge. Close the cover. 46 Cleaning the optical scanner Dust or dirt on the optical glass may cause scanning problems such as vertical lines on a received fax or copied document. If after cleaning, you still get vertical streaks on printed documents, contact your service engineer. NOTE Switch your machine off at the mains. [. . . ]