User manual BT PARAGON 200

[. . . ] Paragon 200 Digital Telephone Answering Machine User Guide This product is intended to be connected to analogue networks in the United Kingdom Please open this page for an `at a glance' guide to your Paragon 200. Please open this page for a further `at a glance' guide to your Paragon 200. At a glance Inductive coupler In the handset. Directory label Sel Display Lets you skip forwards or backwards through your messages during playback. Allows you to change the display contrast. Lets you select the function you want from the range of options. OK Paragon 200 Vol Confirms the setting you want. Sel Adjusts the volume of the loudspeaker when playing back messages and memos. Vol Answer On/Off Switches the answering machine on and off. Also lets you set it to answer only. M1-M3 One-touch buttons OK 05 memo Del Del Deletes messages. Play/Memo Answer on off Play AB DE Plays back messages. Also used to record memo messages. Recall R Store/dial any one of your 3 most used numbers at the touch of a single button. Redial/Pause 1 M1 GH 2 I JK C 3 6 MN O F Message and Ring indicator Recall L 4 M2 5 TU Secrecy S YZ PQ RS WX Redial the last number called. [. . . ] The prompt says "Please enter the number " . The memo will automatically be played back to you. You can press ANSWER ON/OFF to cancel playback. Press DEL during memo playback to delete the memo. Answer on off To delete your personal OGM Del Sel Press and release until the display shows OGM. "Hello, your call cannot be taken at the moment, so please leave your message after the tone. " memo Play Del 13 Message and Ring Indicator The indicator blinks when you have new messages or memos. When you have played them back, the indicator goes off. It will also flash when the telephone rings. To playback your messages Press buttons in the order shown To privately playback your messages through the handset memo Play Press the PLAY/MEMO button. Lift the handset to listen to your messages through the handset. Replace the handset to listen through the loudspeaker again. To delete all messages memo Play ANSWER MACHINE Your messages are played back in chronological order. The display will show the day and time the message was left. When all the messages have been played back, the prompt says "End of messages. " During playback you also have the following options: Skip to the next message. Once to replay the current message or twice to replay the previous message. Del All messages are automatically saved after playback. When the last message has finished playing. Display counts down from 8-0 at the end of which the messages are deleted. Note If you have deleted a message in error you can press ANSWER ON/OFF during the countdown and it will cancel the deletion. The display will show the number of messages. Del Deletes the current message. The prompt says, "Message deleted" and the next message is played. If you pause playback for more than 60 seconds, your Paragon 200 will automatically return to normal mode. memo Play 14 To adjust the playback volume During playback: Vol To use Call Screening You can let your Paragon 200 answer a call and have the loudspeaker switched on so you can hear the caller. This gives you the option of picking up the handset and speaking to them or letting them leave a message. While the Paragon 200 is answering a call or while idle. Adjust the loudspeaker volume. The level is shown at the bottom of the display. To use Caller Return (Auto 1471) Caller Return automatically dials 1471 after a caller has left a message on your answering machine and records the announcement giving the telephone number (if available) and the time of the call. So even if a caller chooses not to leave a message, you may still have their telephone number recorded. Vol Adjust the loudspeaker volume. [. . . ] The caller may be speaking too quietly or has a bad connection. Cannot access your machine from another phone Pack the unit securely, preferably in the original packaging. All parts must be returned including the mains power adaptor. We cannot take responsibility for goods damaged in transit. Make sure the phone you are calling from has a TouchToneTM keypad. When entering your security PIN, allow enough time - at least 2 seconds between each digit for your Paragon 200 to recognise each one. To reset Help and advice Emergency calls GENERAL INFORMATION The emergency services can be contacted in the UK by dialling 999 or 112 which is valid in any country that is a member of the European community. No dialling tone Check that your machine is connected to the phone socket. Display does not come on If your Paragon 200 will not respond to any button presses, remove the back-up battery and turn off the power for 10 seconds. [. . . ]