User manual BUFFALO BR-PX68U2

[. . . ] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44 Factory Defaults . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44 LCD Message List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45 Compliance Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47 TeraStation PRO WSS User Manual 2 Chapter 1 Opening Windows Storage Server Opening Windows Storage Server To open Windows Storage Server, perform the following procedure. If using Mac OS X , download and install "Remote Desktop Connection Client for Mac 2" from www. microsoft. com. If using Mac OS X 10. 3. 9, use version 1. 0. 3 instead. 1 2 Double-click the Buffalo NAS Navigator2 icon on your desktop. In Mac OS, click the Buffalo NAS Navigator2 icon in the Dock. In NAS Navigator2, right-click (for a Mac, click while holding down the Control key) the TeraStation icon and select [Open Remote Desktop]. [. . . ] Files are updated whenever a save or delete operation is performed at the main TeraStation. Note: Replication can be specified for individual shared folders. A maximum of 64 shared folders can be specified. Network Main Replication If the Main TeraStation Fails Open the Web Admin Interface of the replication TeraStation and change the settings to enable use as the main TeraStation. Replication only copies data, not settings. Network Main Replication (Before Setting as Main) Rebuilding Replication After repair, reconnect the original TeraStation to the LAN port of the main TeraStation and set up replication again with the original TeraStation as the new backup. Network Replication (Repaired Main) Main (Original Replication) TeraStation PRO WSS User Manual 20 Configure replication as described below. 1 In Windows Storage Server, navigate to [Start] - [All Programs] - [BUFFALO] - [Backup & Replication]-[Backup & Replication Setting]. 2 Click the [Replication] tab. Remote Desktop 3 Click the [Replication sender] box, then click the displayed displayed screen. . The replication source folder is set in the Note: If a shared folder on the TeraStation is set as a replication source folder, and NFS configured to use the same folder, replication may fail. To perform replication, execute the procedure below. During replication, performance may be reduced. 1 In Windows Storage Server, enter "regedit" from "Search programs and files" and press the [Enter] key. 2 Locate and then click "HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\NfsServer\Parameters". 3 Create "FFCompat" for DWORD in "HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\NfsServer\ Parameters". 4 Set 1 for the value of "FCCompat". 5 Restart the TeraStation. 4 Click Notes: in the [Replication destination] box and select the replication target folder from the drop-down menu. · Only shared folders in TeraStations that support replication can be selected. For a list of supported devices, please refer to the Buffalo Technology website (www. buffalotech. com). 3 Right-click the user whose password will be changed and click [Set Password]. Remote Desktop 4 Click [Proceed]. Remote Desktop 5 Enter the password in [New password] and [Confirm password], then click [OK]. Remote Desktop This completes the changing of the password. TeraStation PRO WSS User Manual 30 Adding a User A user can be added by performing the procedure below. 1 In Windows Storage Server, navigate to [Start] - [All Programs] - [Administrative Tools] - [Computer Management]. 3 Right-click [Users], and click [New User]. The New User screen is displayed. Remote Desktop 4 Enter the user name, password, and other information, then click [Create]. Remote Desktop This completes the adding of a new user. Note: Accounts not belonging to the Administrators group cannot be connected by the Remote Desktop. TeraStation PRO WSS User Manual 31 Adding a Group A group can be added by performing the procedure below. 1 In Windows Storage Server, navigate to [Start] - [All Programs] - [Administrative Tools] - [Computer Management]. 3 Right-click [Groups] and click [New Group]. The New Group screen is displayed. Remote Desktop 4 Enter the group name, a description, and click [Add]. Remote Desktop 5 Click [Advanced]. Remote Desktop TeraStation PRO WSS User Manual 32 6 Click [Find Now]. Remote Desktop 7 Select the users to be registered to the group, then click [OK]. Remote Desktop 8 Click [OK]. Remote Desktop 9 Click [Close]. Remote Desktop This completes the adding of a new group. TeraStation PRO WSS User Manual 33 Creating a Shared Folder No shared folders are set in the initial settings. Use the procedure below to create shared folders beforehand. 1 In Windows Storage Server, navigate to [Start] - [All Programs] - [Administrative Tools] - [Computer Management]. 3 Right-click [Shares], then click [New Share]. The setup wizard should launch automatically. Remote Desktop 4 Click [Next]. Remote Desktop 5 Enter the path of an existing folder or a new folder, and then click [Next]. Note: If the message "The system cannot find the specified path. [. . . ] LCD Message LINK SPEED When an Ethernet cable is connected to LAN Port 2, "LINK SPEED 2" is displayed. Disk Space Used Host Name and IP Address Calendar/Clock Installed OS IP Address 2 11 on the front of the Description Not connected to network. Bar graphs are shown to indicate the used space for the C, D, E, and F internal drives of the TeraStation. When a hard drive is full, it is indicated by "^". [. . . ]