User manual BUFFALO WLI-CB-B11 QUICK SETUP

[. . . ] CardBus slots are usually located on the left or right side of the notebook. Once the Wireless Notebook Adapter is installed correctly, the Found New Hardware Wizard will launch automatically. If the Found New Hardware Wizard does not launch, remove the Wireless Notebook Adapter and restart the notebook. Reinsert the Wireless Notebook Adapter once the notebook has rebooted into Windows. Select Install the software automatically. [. . . ] For more information about the Wireless Zero Configuration Service, refer to the AirStation Wireless Adapter's User Manual. You have finished installing your Wireless Notebook Adapter-B. See Installing Client Manager to install Client Manager on your notebook. Client Manager will not function properly if the Wireless Zero Configuration Service is activated. For more information about configuring and operating your Wireless Notebook Adapter-B and Client Manager, refer to the AirStation Wireless Notebook Adapter-B Help, located on the Air Navigator CD. Note: Buffalo Technology recommends that users of the Wireless Zero Configuration Service upgrade to the latest version freely available at http://www. microsoft. com Skip to Page 9 if you are not using Windows XP or prefer not to use Windows XP's Wireless Zero Configuration Server. It is recommended to use Wireless Zero Configuration if available. 6 Windows 98/ME/2000 Installation & Configuration Step 2 Installing the Wireless Notebook Adapter -B Insert the Wireless Notebook Adapter, with the Buffalo logo facing up, into an available CardBus slot. CardBus slots are usually located on the left or right side of the notebook. Once the Wireless Notebook Adapter is installed correctly, the Found New Hardware Wizard will launch automatically. If the Found New Hardware Wizard does not launch, remove the Wireless Notebook Adapter and restart the notebook. Reinsert the Wireless Notebook Adapter once the notebook has rebooted into windows. . Select Search for a suitable driver for my device. Click the Next button to continue to the Locate Driver Files page. 7 Verify that no Optional search locations are selected. Click the Next button to continue to the Driver Files Search Results page. Windows will display a driver you can use with the Wireless Notebook Adapter. Click the Next button to continue the installation process. Windows 2000: If the Digital Signature Not Found page opens, informing you that no digital signature exists for the driver you are installing, click the Yes button to continue the installation process. When the Wireless Notebook Adapter is successfully installed, click the Finish button. You have finished installing your Wireless Notebook Adapter-B. See Installing Client Manager to install Client Manager on your notebook. 8 Installing Client Manager Note: Client Manager does not function properly if the Windows XP Wireless Zero Configuration Service is enabled. The AirNavigator dialog box will open automatically. If the AirNavigator dialog box does not open automatically, select Start»Run and enter D:\Setup. exe in the Open field to open the dialog box manually. [. . . ] www. buffalotech. com/wireless info@buffalotech. com 866-752-6210 (USA & Canada only) The constantly evolving state of wireless products and operating systems requires Buffalo Technology to occasionally release updated software to take advantage of new technologies and to comply with industry standards. For the most recent software, firmware, driver, and technical whitepaper releases available, please visit the Buffalo Technology website. FCC Compliance Statement - See owners manual for complete statement. This device complies with Part 15 of the FCC Rules. [. . . ]