User manual BUFFALO WLI-CB-G108 QUICK SETUP

[. . . ] Click the No button to abort the installation process. Also, close the onscreen help that appears; it is not necessary for this setup. 2 Step 2 Installing the Wireless CardBus Adapter When the window which prompt you to attach the Wireless CardBus Adapter to the CardBus appears, firmly insert the Wireless CardBus Adapter into an available CardBus slot. CardBus slots are located on one side of the Laptop. Please consult the Laptop Manufacturer's documentation for CardBus installation instructions. 3 If the Found New Hardware Wizard launches, click Finish to complete the wizard. When the Wireless CardBus Adapter is successfully installed, click the Finish button. Restart your PC if prompted. Windows 2000: If the Digital Signature Not Found page opens, informing you that no digital signature exists for the driver you are installing, click the Yes button to continue the installation process. When the Wireless CardBus Adapter is successfully installed, click the Finish button and restart your PC if prompted. [. . . ] Once the Installer Wizard launches, click the Next button to begin the software installation. 7 Press I Agree to accept the license agreement and continue the installation process. Choose the installation path or accept the default path and press the Next button to continue. Setup will begin copying files at this point. Press the OK button to finish and close the installation program. 8 Press the Exit button to exit the Client Manager installation utility. The Buffalo Client Manager is now installed and running, right clicking on its icon (the black laptop CardBus icon) will allow you to begin using it. For detailed instructions on using Buffalo's Client Manager, please refer to the AirStation Wireless CardBus Adapter Manual, located on the Air Navigator CD in the MANUAL folder. To quickly connect to an available access point double click on its icon, select the survey screen, select the proper wireless network and press the 'Connect' button. This will connect you to the Access Point, you may be required to enter encryption settings to properly connect. Depending on the operating system, some screens may vary from those shown in this guide. However, by accepting default installation settings, Client Manager should properly install. For more information about configuring and operating your Wireless CardBus Adapter and Client Manager, refer to the AirStation Wireless CardBus Adapter Manual, located on the Air Navigator CD in the MANUAL folder. 9 Using Client Manager Client Manager consists of the Status page, the Survey page and the Profiles page. You can access each page by clicking the corresponding tab from any screen. In addition to the tabs, several sub-tabs are available to allow even more customization. By default, this page is displayed when you start Client Manager. This page displays the status of the connection between the wireless adapter and another wireless device. This page only displays connection information no changes to the connection can be made from this screen. Use this page to survey the area, display available access points, and connect to available access points. Profiles provide the option to save the information associated with a specific wireless network so you can quickly and easily connect to that network when you are back in that location in the future. The Profiles page allows you to add, delete and edit your profiles, 10 Using AOSS AOSS (AirStation One-Touch Secure System) is a simple, one-touch setup for connecting wireless clients to an access point while setting up the most secure possible connection. Users no longer need to worry about choosing the proper security protocols, IP addresses, or SSID's. The intelligence of AOSS determines the most optimal connection and configures itself in seconds. Using the Quick Setup Guide for your client device, please install the drivers and client manager software. Once complete, the following steps will guide you in using Buffalo's Client Manager software to initiate an AOSS connection. It is recommended to shut off any personal firewalls on your PC (such as Zone Alarm, Microsoft Personal Firewall, Norton Internet Security, etc. ). These programs may cause issues with the AOSS setup procedure. They may be re-enabled after the AOSS process has been completed. NOTE: AOSS automatically creates a secure connection to your AOSS Access Point. [. . . ] www. buffalotech. com/wireless info@buffalotech. com 866-752-6210 (USA & Canada only) The constantly evolving state of wireless products and operating systems requires Buffalo Technology to occasionally release updated software to take advantage of new technologies and to comply with industry standards. For the most recent software, firmware, driver, and technical whitepaper releases available, please visit the Buffalo Technology Website. FCC Compliance Statement - See owners manual for complete statement. This device complies with Part 15 of the FCC Rules. [. . . ]