User manual BUSHNELL MIL DOT

[. . . ] #: 98-0397/03-04 MIL DOT RIFLESCOPE INSTRUCTION MANUAL USING MIL DOTS Your new Bushnell riflescope contains a mil-dot reticle, the most accurate means of range estimation using a manual optical device. These mil dots also allow precise leads for moving targets and exact compensation for shooting in a crosswind. [. . . ] It's easy to measure in half-mils or even quarter-mils but with practice you can measure tenths of a mil. MIL WIDTH FOR WIND AND MOVING TARGET LEADS Distance 100 Yards 200 Yards 300 Yards 400 Yards 500 Yards 600 Yards One Mil At This Distance (Inches) 3. 6" (0. 1 Yard) 7. 2" (0. 2 Yard) 10. 8" (0. 3 Yard) 14. 4" (0. 4 Yard) 18. 0" (0. 5 Yard) 21. 6" (0. 6 Yard) LIFETIME LIMITED WARRANTY* Your Bushnell® product is warranted to be free of defects in materials and workmanship for the lifetime of the original owner. The Lifetime Limited Warranty is an expression of our confidence in the materials and mechanical workmanship of our products and is your assurance of a lifetime of dependable service. In the event of a defect under this warranty, we will, at our option, repair or replace the product, provided that you return the product postage prepaid. This warranty does not cover damages caused by misuse, improper handling, installation, or maintenance provided by someone other than a Bushnell Authorized Service Department. or Canada made under this warranty must be accompanied by the items listed below: 1) A check/money order in the amount of $10. 00 to cover the cost of postage and handling 2) Name and address for product return 3) An explanation of the defect 4) Proof of Purchase 5) Product should be well packed in a sturdy outside shipping carton, to prevent damage in transit, with return postage prepaid to the address listed below: IN U. S. A. Send To: Bushnell Performance Optics Attn. : Repairs 8500 Marshall Drive Lenexa, Kansas 66214 IN CANADA Send To: Bushnell Performance Optics Attn. : Repairs 25A East Pearce Street, Unit 1 Richmond Hill, Ontario L4B 2M9 = Range In Yards This formula works equally well with meters, but don't mix meters and yards: Measure the object in yards to find the distance in yards, use meters to yield distances in meters. Looking through your scope, set at 9x, select an object at the distance you want to range -- an object whose width or height you know or can estimate accurately. Man-made objects of uniform size, such as fenceposts, are best, but any object of known dimensions will do. Measure the object's height or width carefully in mils, compute it according to the formula and you will find its range. Support your rifle and be precise when measuring objects; any measuring error causes an error in the computed range. Equally, mis-estimating the object size results in a proportional range error. [. . . ] You may have other rights which vary from country to country. ©2004 Bushnell Performance Optics www. bushnell. com [. . . ]