User manual BUSHNELL SPORTVIEW 78-2061

[. . . ] #: 91-0220/03-01 20-60 x 60mm Vari-Power Spotting Scope 1. MOUNTING Remove the spotting scope and tripod from the box. [. . . ] To adjust where the scope is pointing, rotate the handle counter clockwise. Point the spotting scope as desired ­ as described in section 2. CAUTION: DO NOT LOOK AT THE SUN THROUGH THIS SPOTTING SCOPE AS SEVERE EYE DAMAGE MAY RESULT. Set the vari-power ring at the lowest power (20x). Focus the spotting scope as described in section 2. Please note, however, that at the highest powers the image may not appear sharp, because of several causes. First, the image will become less bright, second, all disturbances and contaminations in the air will be emphasized, and last, all motion and vibration of the spotting scope and support will also be magnified. CARE The lenses of your spotting scope are 100% hard magnesium fluoride coated for highest light transmission. As with any optical coating, special care must be taken in cleaning the lenses. Moisten surface of lens slightly and wipe dry using a circular motion starting at center of lens. Wipe or brush off any dirt or dust on the outside of spotting scope and tripod. 5. CAUTION Never disassemble your spotting scope or tripod. [. . . ] This warranty gives you specific legal rights. You may have other rights which vary from country to country. ©2001 Bushnell Performance Optics [. . . ]