User manual BUSHNELL TRAIL SENTRY 11-9320C (WALMART ONLY)

[. . . ] TRAIL SENTRYTM Digital Trail Camera with Night Vision LIT #: 09-0940/03-07 Model 119320C Instruction Manual 3/21/07 4:50:28 PM 119320C WalMart Trail Sentry man1 1 Congratulations on your purchase of the Bushnell® Digital Trail SentryTM Camera!This weatherproof, rugged trail camera is designed to record still images or movie clips of outdoor wildlife activity. This instruction manual will help you understand, setup, and use your Sentry to achieve the best possible results. Bushnell Digital Trail Sentry Features If you've been looking for a digital game scouting or surveillance camera that has all the essential features but without the unwanted frills, expense, or confusing operational menus of some less effective off-brand "game cams", the Bushnell Trail Sentry will end your search. With one of the most user friendly interfaces in the industry, this trail camera is easy to setup and use. [. . . ] Events are recorded continuously during operation. Image--A digital picture recorded on the SD Card when motion is sensed. Images are taken at the desired delay between images. Image Delay--Time elapsed between photos while events are sensed and recorded. This is fixed at 30 second intervals in the Trail Sentry. Sends a burst of Infrared Energy which is invisible to the human eye. Especially useful for night photos when a visible flash is undesirable. Camera Flash--Xenon Flash used for low light photography. SD Card--Memory card used to store images and events. Compatible with up to 1GB capacity SD card. Battery Life--Time that camera will function in the field. Dependent on temperature, number of images and number of flashes during that time. Setup--Using the display menu and buttons to set the date/time, still photo or movies, and password. Security (2 methods)--One of the most important requirements of any trail camera. The Trail Sentry has levels-- padlock tab and software password. Trigger Speed--Time delay between a subject passing in front of PIR sensor and the image capture of that subject. All Bushnell Trail Cameras have a trigger speed of less than one second. 6 119320C WalMart Trail Sentry man6 6 3/21/07 4:50:28 PM Front of Camera PIR StandardFlash LED IR Flash Camera Lens Control Panel Inside Front LCD Display SD Card Slot PIR Detected (or Low Battery) LED Lock Tab Setup, Menu & Power Buttons Button & Display Detail Parts Guide 119320C WalMart Trail Sentry man7 7 3/21/07 4:50:29 PM Setup and Operation Guide 1. Open the Sentry by pulling out on the two latches on the right side. Install 4 "D" cell batteries (flat base of all batteries contacting springs), and insert an SD card (not included, use any capacity from 16MB to 1GB. Do not substitute MMC cards. ) in the slot to the right of the 5 buttons as indicated on the slot cover (upside down, with the notched corner of the card on the left and metal contacts of the card facing the back of the slot). Press the card down until you hear it click into place. If the Sentry is turned on without a card in place, it may not turn off-reset it by pulling one of the batteries out partway, insert a new or empty SD card, and put the battery back in place. [. . . ] Comes complete with aircraft aluminum security cable, padlock, and tree bracket. Textured "bark-like" surface for maximum concealment. 119935/119905 (RealTree AP® Camo)--Digital Trail Scout 5. 0MP with Night Vision With all the features of the 3. 0MP Trail Scout plus Night Vision and more, this is the top of the line digital trail camera. Still photos are stored with 5 megapixel resolution (via software processing), and the video clips are recorded with audio captured by a built-in microphone. [. . . ]