User manual CAKEWALK V-STUDIO 100 BROCHURE

[. . . ] In the case of the symbol at left, it means that the unit must never be disassembled. The symbol alerts the user to things that must be carried out. The specific thing that must be done is indicated by the design contained within the circle. In the case of the symbol at left, it means that the power-cord plug must be unplugged from the outlet. Used for instructions intended to alert the user to the risk of death or severe injury should the unit be used improperly. [. . . ] To finish recording, press the (Stop) button. 5. When you start playback, the recorded file and the background file are played back simultaneously. 6. To cancel the selection of the background file, press and hold the [SHIFT] button and press the [CURSOR/VALUE] knob. If the file for the background playback is selected, rewind and fast-forward operations affect both files. If the background file is longer than the file being recorded, the play button will blink when the recorded file has played to its end, and playback will continue to the end of the background file. To display the name of the file for background playback, press the [SHIFT] button. 35 Using the WAVE recorder Deleting a file A deleted file cannot be recovered. 1. From the main screen, press the [CURSOR/VALUE] knob to access the finder screen (p. From the finder screen, turn the [CURSOR/VALUE] knob to select the file that you want to delete, and then press the [CURSOR/VALUE] knob. 3. Turn the [CURSOR/VALUE] knob to highlight "Delete, " and then press the [CURSOR/VALUE] knob. fig. fileDel0. eps 4. A confirmation screen appears. To delete the selected file, press the [CURSOR/VALUE] knob once again. fig. fileDel1. eps If you decide not to delete the file, press the [DISPLAY] button. 5. When the file has been deleted, you will return to the finder screen. Press the [DISPLAY] button to return to the previous screen. 36 Connections 37 Connections Connecting the AC adaptor Connect the included AC adaptor to the SONAR V-STUDIO 100's DC IN jack. fig. Connect-ACadpt. eps Power Cord (included) AC Adaptor (included) DC IN to Power Outlet Indicator Place the AC adaptor so the side with the indicator (see illustration) faces upwards and the side with textual information faces downwards. * The indicator will light when you plug the AC adaptor into an AC outlet. To prevent the inadvertent disruption of power to your unit (should the plug be pulled out accidentally), and to avoid applying undue stress to the AC adaptor jack, anchor the power cord using the cord hook, as shown in the illustration. fig. CordHook. j. eps Cord Hook AC Adaptor Cord 38 Connections Connecting computers and audio equipments Before connecting the SONAR V-STUDIO 100 to a computer, read the separate Installation Guide and install the SONAR V-STUDIO 100 driver on the computer. To adjust the balance between the sounds input to INPUT 1L and INPUT 2R, use the [PAN] knob. For more information about using the WAVE recorder function, see "Using the WAVE recorder" (p. 26). 42 Connections and signal flow Connecting audio equipment and synthesizers fig. Connect-various. eps Guitar/Bass Microphone Synthesizer, etc. Audio Player, etc. Effects, etc. Monitor amplified speakers Recorder, Mixer, etc. * The sampling frequency of the input signal from digital equipment must be the same as that of the SONAR V-STUDIO 100. For more information about setting the sampling frequency of the SONAR V-STUDIO 100, see "Sampling frequency setting" (p. 52). 43 Connections and signal flow Signal flow when recording with SONAR fig. routing03. eps To USB WAVE IN 1-2 3-4 5-6 7-8 WAVE OUT 1-2 WAVE IN MAIN [SENS] 1L 2R [PAN] [PLAYBACK] MAIN OUTPUT 1/2 [MAIN MIX] [LEVEL] [VOLUME] PHONES output INPUT 3L/4R 5L/6R 7/8 MIXER · To control the direct monitor volume for the input signal, use the [MAIN MIX] knob. · To control the SONAR's playback volume, use the [PLAYBACK] knob. 44 Connections and signal flow Signal flow when recording with the WAVE recorder fig. routing04. eps To WAVE RECORDER [SENS] 1L 2R INPUT 3L/4R 5L/6R 7/8 [LEVEL] [PAN] [PLAYBACK] MAIN OUTPUT 1/2 [MAIN MIX] PHONES output [VOLUME] MIXER · Signals input to INPUT 1­8 are mixed and recorded on the WAVE recorder. · To control the recording level of the WAVE recorder, use the [MAIN MIX] knob. The recording level can be checked with the level meter. · To control the playback level of the WAVE recorder, use the [PLAYBACK] knob. · If you change the system setting "WAV-Rec Source, " you can also use the WAVE recorder to record only the signals input to INPUT 1L/INPUT 2R. [. . . ] No. 18 3 Section Anhuaxili Chaoyang District Beijing 100011 CHINA TEL: (010) 6426-5050 PHILIPPINES G. A. Puyat Avenue Makati, Metro Manila 1200, PHILIPPINES TEL: (02) 899 9801 ROMANIA FBS LINES Piata Libertatii 1, 535500 Gheorgheni, ROMANIA TEL: (266) 364 609 CROATIA ART-CENTAR Degenova 3. HR - 10000 Zagreb TEL: (1) 466 8493 RUSSIA MuTek Dorozhnaya ul. 3, korp. 6 117 545 Moscow, RUSSIA TEL: (095) 981-4967 EUROPE EDIROL (Europe) Ltd. Studio 3. 4 114 Power Road London W4 5PY U. [. . . ]