Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual CALIBRE CALIBREDL WIRE. We hope that this CALIBRE CALIBREDL WIRE user guide will be useful to you.
Lastmanuals help download the user guide CALIBRE CALIBREDL WIRE.
Manual abstract: user guide CALIBRE CALIBREDL WIRE
Detailed instructions for use are in the User's Guide.
[. . . ] BLOCK DIAGRAM
CALIBRE
BLACK
GROUND #8 X 1/2" TEK
*NOTE: THE RED WIRE SHOULD BE CONNECTED TO A MINIMUM 16 GAUGE +12 VOLT IGNITION WIRE.
RED
INTERIOR NETWORK MODULE
IGNITION SWITCHED +12 VOLTS
AMPLIFIED SPEAKER
BROWN BLUE WHITE GRAY
WHITE
BLUE
FRONT
+12 VOLT BATTERY OR IGNITION SOURCE RECEIVER CABLE FUSE CONNECTION
REAR
RECEIVER CABLE
FRONT RADAR pod
FUSE CONNECTION
REAR RADAR pod
(CALIBRE DL-P model only)
1AMP
WHITE YELLOW* BROWN* BLACK YELLOW* BROWN*
BLUE
1AMP
+12 VOLT BATTERY OR IGNITION SOURCE
BLACK
COPPER COPPER SILVER (NOT USED) CLEAR ZIP CORD
GROUND #8 X 1/2" TEK
COPPER COPPER SILVER (NOT USED)
GROUND #8 X 1/2" TEK
BLACK ZIP CORD
CLEAR ZIP CORD
BLACK ZIP CORD
*THE YELLOW AND BROWN RADAR RECEIVER WIRES ARE USED TO CONNECT TO THE OPTIONAL LASER DEFUSER(S). [. . . ] Connect the black wire to a solid chassis ground using the provided ring terminal and silver selftapping screw. Radar receivers may be connected to either a +12 volt ignition on source or +12 volt constant battery source.
GRAY
GRAY
SILVER
SILVER
BLOCK DIAGRAM
CALIBRE
BLACK
GROUND #8 X 1/2" TEK
*NOTE: THE RED WIRE SHOULD BE CONNECTED TO A MINIMUM 16 GAUGE +12 VOLT IGNITION WIRE.
RED
INTERIOR NETWORK MODULE
IGNITION SWITCHED +12 VOLTS
AMPLIFIED SPEAKER
BROWN
BLUE WHITE GRAY
WHITE
BLUE
FRONT
+12 VOLT BATTERY OR IGNITION SOURCE RECEIVER CABLE FUSE CONNECTION
REAR
FRONT RADAR LED REAR RADAR LED
(CALIBRE DL model only) RECEIVER CABLE FUSE CONNECTION
1AMP
WHITE YELLOW* BROWN* BLACK YELLOW* BROWN*
BLUE
1AMP
+12 VOLT BATTERY OR IGNITION SOURCE
BLACK
COPPER COPPER SILVER (NOT USED) CLEAR ZIP CORD
GROUND #8 X 1/2" TEK
COPPER COPPER SILVER (NOT USED)
GROUND #8 X 1/2" TEK
BLACK ZIP CORD
CLEAR ZIP CORD
BLACK ZIP CORD
*THE YELLOW AND BROWN RADAR RECEIVER WIRES ARE USED TO CONNECT TO THE OPTIONAL LASER DEFUSER. IF NO LASER DEFUSER IS BEING INSTALLED WITH THE RADAR RECEIVER (FRONT AND/OR REAR), THE YELLOW AND BROWN WIRES WILL NOT BE USED.
FRONT LASER DEFUSER
(OPTIONAL)
REAR LASER DEFUSER
(OPTIONAL)
IGNITION AND GROUND
1. Use a test meter to locate an ignition on source for the Interior Network Module with +12 volts when ignition key is both on and cranking. [. . . ] Radar receivers may be connected to either a +12 volt ignition on source or +12 volt constant battery source.
44586-1 4/06
GRAY
GRAY
SILVER
SILVER [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE CALIBRE CALIBREDL WIRE
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual CALIBRE CALIBREDL WIRE will begin.
