User manual CALIFONE CD-102

[. . . ] Battery Power/ Volume Indication When the batteries become weak, the LCD display will indicate the "low battery" symbol. Replace the batteries to restore correct operation. 4. The CD Player Output Connection The CD Player output can be connected to headphones (14), external amplifier, and jackbox for multiple listeners (15). 15 14 3 Operation Play Mode Press the [OPEN] button to open the cover and then insert the CD. Place the center of the CD onto the spindle and gently press down to secure it in place. [. . . ] Repeating the Whole Disc Press the MODE button twice. The LCD will indicate 1 ALL and the player will repeat playing the entire disc. Pressing the MODE button three times will return to the normal playing condition. Intro Mode The Intro Mode describes when the player will play the first 10 seconds of each track on the entire disk and will then automatically turn off. Press the MODE button three times and the LCD display will indicate "INTRO. " Then press the PLAY button and the "INTRO" mode will begin. Random Mode Press the MODE button four times. The LCD will indicate "SHUFF. " Then press the PLAY button to begin. The player will play all tracks on the disc in random order until all tracks have been played. Press the MODE button once to exit RANDOM mode. 6 Automatic Start-Up/Shut Off Power On While in STOP mode, press the PLAY button. The Player will automatically start up and the display will indicate the start up sequence as shown in figure 1 (left). Auto Shut Off The Player will shut off automatically if no operation is selected within a one minute period after turning the CD Player on or after a disc has completed playing. If there is no disc in the unit, it will automatically shut off after approximately 30 seconds. "DISC" (no disc) Indication If there is no disc in the player or if a disc is not inserted correctly, the player will show "disc" on the LCD for approximately 30 seconds after pressing the PLAY button. 7 Shock Protection (ESP/Anti-Shock) Vibration Resistant By reading audio date and storing it in the "ANTI-SHOCK" memory, vibration resistance is achieved. When the player is bumped or knocked, the CD player will compensate with the data in its memory. The CD player also contains a vibration resistant mechanism to prevent the skipping noise caused by the change of playing speed when the player is "rocked". Auto ESP When pressing the PLAY button, the Anti-Shock System will automatically be enabled. The in the display will turn into after a few seconds of play. When vibration continues, the in the display will turn into depending on the length of the vibration. To Cancel "ANTI-SHOCK" Press the ESP button, the in HOLD Function Moving the HOLD switch to the "On" position locks the unit, protecting it from an accidental pressing of another button while in use. the display will turn off 8 Charge Function (Optional) Charge Function 1. The CD Player will charge correctly sized rechargeable batteries (which are not supplied with the unit. ) Open the battery cover and insert the rechargeable batteries into the battery compartment, making sure the correct polarity as shown in diagram 1 (left) is observed. Continuously press FAST FORWARD, REWIND, NEXT & PREVIOUS FUNCTIONS. [. . . ] Very hot places such as near heating appliances, etc. Do not leave the unit exposed to direct sunlight for long periods of time. This may deform or discolor the cabinet and may also cause malfunctioning. This product utilizes a laser. Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. [. . . ]