User manual CALIFONE DVD105

[. . . ] DVD / VIDEO CD / MP3 / CD - PLAYER DVD105 OPERATION MANUAL PLEASE READ THE INSTRUCTION CAREFULLY BEFORE OPERATING THIS UNIT. WARNING To prevent fire or shock hazard, do not expose this appliance to rain or moisture. IMPORTANT Since the CD circuitry may cause interference to other radio tuners nearby, switch this unit off when not in use or move it away from the affected radio tuner. This device complies with Part 15 of the FCC Rules, operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesirable operation. NOTE : This equipment has been tested and found to comply within the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. [. . . ] Using the DVD Menu Some DVDs include special menus called DVD menus. for example, DVDs with complex contents may contain guide menus, and DVDs with multiple languages may contain audio and subtitle, language menus. When you play these DVDs, you can select the language for the subtitles, the language for the sound, etc. , using the DVD menu. Press the ROOT button · The "root menu" appears on the TV screen. The contents of the menu vary from disc to disc. · If the ROOT button is pressed again, the disc returns to the point at which the DVD menu was called out and playback resumes from that point. Press the number buttons to select the item you want to change, or press the cursor buttons ( 3. Press the ENTER button · If more menus appear, repeat steps 2 and 3. · · If you want to select the language for the DVD menu, change the setting using LANGUAGE SETUP in the setup display. Depending on the DVD, a DVD menu may simply be called a menu in the instructions supplied with the disc. / / / ). 15 PLAYING VCD WITH PBC FUNCTION (PBC PLAYBACK) When playing VCDs with PBC functions (Ver 2. 0 discs), you can enjoy simple interactive operations with search functions. PBC Playback allows you to play VCDs interactively, following the menu screen on the TV screen. Start Playing a VCD with PBC functions, following the Step 1 to 4 in Playing Discs. Select the item number you want on the player · Press the number button of the item you want on the remote control unit. Follows the instructions on the menu screen for interactive operations. Refer to the instructions supplied with the disc, as the operating procedures may differ according to the VCD. Going back to the menu screen: Press the RETURN, FR or FF buttons. To cancel PBC playback of a VCD with PBC functions and play the disc in continuous play mode: 1. Press the STOP button while the VCDs menu screen is displayed. · The display switched from PBC to the time display. Use the number buttons to input the desired track number. To play the disc without using the menu playback function: · Refer to the discs jacket, etc, for the track number · To start playback from the beginning of the disc, press the number button. Return to menu playback · Press the STOP button to stop playback, then press the ROOT button. [. . . ] · Turn on the equipment connected with the audio cable. · Set the Digital audio Output to the correct position, then turn on the DVD player again by pressing the POWER button. · Insert a disc · Insert a playable disc. (Check the disc type, color system and Regional code. ) · Place the disc with the playback side down. [. . . ]