User manual CAMBRIDGE AUDIO 86

[. . . ] Congratulations on purchasing this Cambridge Audio 80 Series DVD player. We hope that you will enjoy many years of rewarding ownership. The DVD85, 86 and 89 models all support normal CD and DVD discs, while the DVD89 is also a `universal' player that supports DVD-Audio (DVD-A) and Super Audio CD (SACD). These new audiophile formats allow even greater sound quality than CD/DVD and also allow multichannel surround-sound audio. [. . . ] DVD89 Only When you press the setup button two options will be displayed, common and professional. Press the common setup, to setup basic functions, or the professional setup for more advanced settings. Front, Centre and Rear Speaker Settings: adjusts the DVD decoder to compensate between large and small speakers and the size of the signal it sends to the subwoofer. subwoofer Off/On: Informs the player if a subwoofer is present. If it is present the low frequencies are split off and sent to the subwoofer, if not the complete audio spectrum will be heard through the front channel. Channel Delay: Allows the distance between the listening position and the centre, subwoofer, rear left and rear right speakers to be individually set (in cm). This is to enable the surround sound to be optimised for different listening room sizes and shapes. TV Display: Allows you to alter between 16. You will need a suitably equipped television to handle a component signal. Screensaver: If the DVD is left on and inactive, it will switch to a screensaver to minimise energy consumption and screen burn. Subtitle: Setting a particular language here means that the DVD will look for this particular language. Parental: Adjusting this blocks films above a set classification level (ie PG13) from playing on the player if children are using it, if you wish. Password: This is how to alter the above settings. The password default is 7890 and can be changed by correctly entering the default followed by your new password. Default: This can restore all of the original factory settings if required. When the disc tray has opened fully, place a disc carefully in the tray with the label side facing up. When the tray with a correctly loaded disc is fully closed, the disc will start turning automatically. After the DVD player has read the disc it will start to play. Pressing PLAY will also close the tray and start playing the disc. The disc tray can be opened at any time by pressing the OPEN/CLOSE button. Only remove the disc after the tray has fully opened. Note: Do not put anything except a DVD/CD sized disc into the tray, foreign objects may damage the mechanism. [. . . ] The remote can control all of the standard playback options but is also important in setting up your DVD player as many of the menus are most easily accessed from the remote. Keep in mind the following when using the remote control: · Make sure that there are no obstacles between the remote and the remote sensor on the unit. Remote operation may become unreliable if strong sunlight or fluorescent light is shining on the unit's remote sensor. Remote controllers for different devices can interfere with each other. [. . . ]