User manual CAMBRIDGE AUDIO AZUR 650C

[. . . ] Compact disc player User's manual 2 azur 550C/650C Your music + our passion ENGLISH Contents Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Important safety instructions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Limited warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Rear panel connections. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] The blue LED will remain bright when the unit is on, becoming dim when the unit is in a special eco-friendly standby mode. The unit consumes less than one watt of power during standby. The unit can remain in Standby mode when not in use. It is advisable to switch the unit off at the mains if it is not likely to be used for an extended period of time. Note: For convenience, the player can be programmed to automatically enter Standby mode after a period of inactivity. To enable this feature, see "Using the set-up menu" on page 9. 1 2 4 5 6 Play Open/Close Illuminated during disc playback. 2 Allows you to open and close the disc tray. After placing a CD in the tray, press Open/Close to close the tray. 3 Pause Infrared sensor Indicates that disc playback has been paused. 3 Receives IR commands from the supplied remote control. A clear, unobstructed line of sight between the remote control and the sensor is required. 4 Display Play/Pause Alpha-numeric characters which display playback information. On inserting a disc, the CD player will take a few seconds to read the Table of Contents (TOC) information from the disc. The display will then show the number of tracks on the CD and the total length of the CD. If the CD incorporates CD-text, the name of the album will scroll once (the number of tracks remains stationary throughout). Once playback of an individual track begins, the track number, total number of tracks and play-time will be displayed. On a CD containing CD-text, the track name will scroll once. Pressing the (Info) button on the remote control will re-display the CD-text. 4 Plays the disc and pauses play. 5 Stop Stops the CD playing. 6 Skip/Scan Enables you to skip between and search within tracks. Press and hold to scan through a track. Random Indicates random playback mode. 5 Remain Illuminated when displaying time remaining on track or disc. 6 Repeat All/Track Illuminated when `Repeat Track' or `Repeat All' is selected. 6 azur Remote control The 550C and 650C are supplied with an Azur Navigator remote control that operates both this CD player and Cambridge Audio Azur range amplifiers. Insert the supplied AAA batteries to activate. Always use alkalinetype batteries. 550C/650C ENGLISH Speaker A/B Toggles the speaker terminals on the rear panel to output speaker A only, speaker B only, both speakers A and B or no speaker output at all. The speaker indicators on the front panel of the amplifier show which speaker terminals are selected. Standby/On Switches the amplifier between On and low power ecofriendly Standby mode. Volume controls Increases or decreases the volume of the amplifier output. Open/Close Opens and closes the disc tray. , , , , , Numerical track select Press the number of the desired track. The track will then play automatically from the start of the track. The six source select buttons are used to directly select the input source to the amplifier. Note: the Tape Monitor input works in a slightly different way ­ please refer to your amplifier user's manual for details. Track select To select a track number greater than nine, press -/-followed by the track number. Playback of the chosen track starts automatically. Apple device compatibility The Azur 550AC/650AC Navigator remote control can control the basic functions of Apple devices such as Apple TV and Apple's iPod/iPhone/iPad range when docked in a Cambridge Audio or Apple dock. Press and hold the source button that corresponds to the input that the Apple product is connected to whilst also pressing one of the buttons below. [. . . ] In addition the units feature 'direct' IR/Control codes as well as toggle codes for some of their features to simplify programming custom installation systems. Special direct On/Off and Mute commands can be accessed on the supplied remote control for teaching into C. I. systems or learning remotes as follows: 1. After 12 seconds, the remote first generates a Standby (toggle) command for Azur CD players. [. . . ]