User manual CAMBRIDGE AUDIO DVD80 SERIES

[. . . ] We hope that you will enjoy many years of rewarding ownership. The DVD85, 86 and 89 models all support normal CD and DVD discs, while the DVD89 is also a ‘universal’ player that supports DVD-Audio (DVD-A) and Super Audio CD (SACD). These new audiophile formats allow even greater sound quality than CD/DVD and also allow multichannel surround-sound audio. In addition, the DVD85, 86 and 89 all support DivX® playback for good quality highly compressed video and audio often downloaded from the internet. [. . . ] The password default is 7890 and can be changed by correctly entering the default followed by your new password. Default: This can restore all of the original factory settings if required. When the disc tray has opened fully, place a disc carefully in the tray with the label side facing up. To close the disc tray, press the OPEN/CLOSE button again. When the tray with a correctly loaded disc is fully closed, the disc will start turning automatically. After the DVD player has read the disc it will start to play. Pressing PLAY will also close the tray and start playing the disc. The disc tray can be opened at any time by pressing the OPEN/CLOSE button. Only remove the disc after the tray has fully opened. Note: Do not put anything except a DVD/CD sized disc into the tray, foreign objects may damage the mechanism. Do not force the tray by hand during the opening and closing operations. To avoid dirt and dust entering the mechanism, keep the disc tray closed. If the Disc is seriously scratched or too dirty the player may not be able to read it or play it. Never load more than one disc into the disc tray at one time. Switch on your television and if you have an amplifier, set its input selector to the correct position and reduce the volume control to a minimum. Most televisions will automatically switch to the channel/input that the DVD is connected to. Press the Open/Close button to open the disc tray, and load a disc. Press the Open/Close button again to close the tray. The DVD player will read the disc and begin to load. Alternatively, pressing Play will close the tray and start playing the disc. The DVD disc should load to the opening menu (where scene selection, sound/special features can be accessed). Some discs will begin playing the film but can be returned to the menu by pressing the Menu button. [. . . ] Some discs labelled MPEG4 on the market are actually *. Functions on some discs may not work on this unit. This is not a malfunction of the player. cambridge Audio’s policy is one of continuous improvement. [. . . ]