User manual CAMBRIDGE AUDIO DVD99

[. . . ] DVD99 DVD player User's manual 2 ENGLISH Important safety instructions For your own safety please read the following important safety instructions carefully before attempting to connect this unit to the mains power supply. They will also enable you to get the best performance and prolong the life of the unit: 1. Install in accordance with the manufacturer's instructions. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. [. . . ] *If your AV receiver can switch HDMI but not receive audio in this way, an additional SPDIF or TOSlink cable will be required. If the HDMI input of your TV is only capable of decoding 2-channel digital audio, it is recommended that you set the Down-mix to 'Stereo'* in the Speaker setup page in the DVD99 setup menu. This sets the audio down-mix mode of the DVD player to 'Stereo'. HDMI cable 1 Out In TV/Monitor with HDMI input HDMI cable AV receiver OR * Class 1 Laser Product Luokan 1 Laserplaite Klass 1 Laserapparat Composite Cb / Pb Component Y Digital Outputs PCM/DTS/ Dolby Digital L / Mixed SL C SBL This product complies with DHHS rules 21 CFR, Chapter 1, Subchapter J, Part 1040 at date of manufacture. 4, 631, 603; 4, 577, 216; 4, 819, 098 and 4, 907, 093 licensed for limited viewing only. "DTS" and "DTS Digital Out" is a trademark of Digital Theatre Systems Inc. Manufactured under license from Dolby Laboratories. "Dolby" and the double-D symbol are trademarks of Dolby Laboratories. Confidential Unpublished Works ©1992-1997 Dolby Laboratories. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: 1) This device may not cause harmful interference; 2) This device must accept any interference, including interference that may cause undesired operation. Designed in London, England DVD99 DVD Player Power Rating: 100-240V AC ~ 50/60Hz Max Power Consumption: 40W Cr / Pr CAUTION Risk of electric shock. Do not open. AVIS Risque de choc electrique. Ne pas ouvrir. ACHTUNG Vorm öffnen des gerätes. Netzstecker ziehen. www. cambridge-audio. com HDMI Out S-Video Video Out S/P DIF Co-axial Toslink Optical R / Mixed SR SW SBR 7. 1 Channel Audio Out SCART (Composite/RGB/Stereo Audio) 2 TV/Monitor with HDMI input In 1 2 Connection to a TV via an AV Receiver Direct connection to a TV 9 DVD player setup Press the Setup button on the remote to enter the Setup menus, Two menu options will be displayed, common and professional: General setup page - - General Setup Page - TV Display Screen Saver Scart SACD Priority Component Mode DVD-Audio Mode Subtitle Font Auto Play Mode 16:9 Wide On YCbCr Multi-Channel P-Scan DVD-Audio Font 1 On Setup Go To General Setup Page With the General setup page selected, use the and buttons to move up/down to the desired sub-menu. Use the navigation buttons ( ) to adjust the settings and press the ENTER button to confirm your selection. See the following list for the General setup page structure: Menus Select the common setup to setup basic functions, or professional setup for more advanced settings. TV Display Settings 4:3 PanScan 4:3 LettBox 16:9 Wide 16:9 Wide/Auto On Off YCbCr RGB Multi-Channel 2-Channel CD Mode P-Scan Interlace DVD-Audio DVD-Video Font 1 Font 2 Font 3 On Off Professional Setup Menu Running along the top of the screen are five icons that represent the five main menu pages: General setup Speaker setup Audio setup SACD Priority Video setup Preference Setup* Component Mode Scart Screen Saver * Note: To enter the Preferences menu the unit must first be in Stop mode with the disc drawer out. Press Setup to enter the menu system. Use the navigation arrows ( ) on the remote to highlight the icon at the top of the screen for the main menu you want to select and then either press ENTER or to go into that menu and select its first sub-menu. You can now navigate to each sub-menu item you might want to change using and then to select settings. The yellow highlight always shows the menu or setting you have navigated to, the orange/brown highlight shows the current setting that is being used. Pressing ENTER stores a highlighted setting as the new one to use. To navigate back out of a sub-menu press to move to the sub menu list if necessary and again to move to the top main menu list. You can now use to select a new main menu. [. . . ] The window returns back to the previous directory when you select [ . . ] in the first line or press LEFT arrow. Press UP/DOWN arrows in Figure B to select the desired MPEG4 file. The player will then play the MPEG4 files. Info menu Pressing the Info button brings up the menu shown below: Note: This display may vary due to the formatting and programming of your DVD disc. This enables you to conveniently perform several DVD disc functions of title, chapter, sound, subtitle, angle, title time, chapter time, repeat play and time display. [. . . ]