User manual CAME ATI KIT FOR PAIR OF GATES

[. . . ] This unit has been designed and built by CAME in accordence with current safety standards UNI 8612. [. . . ] Safety Photocells can be connected to obtain: a) Re-opening during the closing cycle (dip-switch 7); b) Total stop: the movement is interrupted, and the automatic closure cycle is disactivated. Use the keyboard or the radio transmitter to resume the movement (dip-switch 8); Accessories which can be connected to this unit -Flashing signal light during motion; -Cycle signal lamp; -Courtesy light ; -Radio control. Other functions available -Automatic closing: The automatic closing timer is automatically activated at the end of the opening cycle. The adjustable closing time is automatically interrupted by the activation of any safety system, and is deactivated after a total stop command or in case of power failure; -Detection of obstacles with motor at limit position (door wing completely opened or closed). Before doing any connection or disconnection work on the board, the system must be disconnected from the power supply. Insert an AF frequency card encode transmitter/s Store the code on circuit card FRANCAIS PROCEDURE D'INSTALLATION DE LA RADIOCOMMANDE Attention!9 MHz (TOP and TAM series), position the jumper connection on circuit card AF43S as shown on the sheet. B The first encoding operation must be carried out whilst keeping the jumpers positioned for channels 1 and 2 as per fig. [. . . ] - While holding down key "CH" (signal LED flashing), press the control key on the transmitter: the LED lights to confirm that the code has been stored. [. . . ]